Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Moss Beach, CA | Ashford Contractors
We provide independent Mr-Glass in Half Moon Bay and service across Moss Beach, from full window and slider replacements to storm door rebuilds and frameless shower enclosures. What makes our Mr-Glass work different here is simple: Moss Beach sits in the San Mateo coast fog belt, and salt-laden marine air eats standard fasteners, flashing, and aluminum finishes years faster than inland. So before we touch any Mr-Glass opening, we check the hidden parts of the wall cavity, not just the glass. Call (877) 752-3868 for a free estimate.
Ashford Contractors handles Mr-Glass sales & service across Moss Beach service area with one project manager and one contract covering the whole job. We are not the manufacturer or an authorized agent, and we say that plainly. What we are is a full-scope general contractor that reads Mr-Glass specs the way a coastal builder should: with the salt air, fog, and wind-driven rain of this specific town in mind.
Why Moss Beach Residents Choose Us for Mr-Glass Service
We work with Mr-Glass aluminum sliders, vinyl windows, storm doors, and tempered glass enclosures every season here, so we know which components fail first on an ocean-facing elevation. The product lineup isn’t the mystery; the environment is. Moss Beach homes demand stainless or copper detailing where inland spec sheets assume galvanized will hold. We make that adjustment as a matter of course, not as an upsell.
Glen Mossier grew up on the Peninsula, trained in construction technology at Skyline College, and spent years squaring framing and subfloors before anything else went in. That background matters on Mr-Glass in Pacifica and here because a window or slider only performs as well as the rough opening behind it. In Moss Beach, where hidden rot behind old flashing is common, knowing what’s behind the frame is the whole job. We pull the unit, expose the opening, fix what’s soft, and then reset everything on materials that can handle this climate.
We’re licensed as a General Contractor in Moss Beach, insured, and we write line-item estimates so you see exactly what the materials and labor cost before work starts. No change orders once the scope is set.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Moss Beach
- Pitted and chalked aluminum frames. Salt fog attacks Mr-Glass extruded aluminum on the ocean-facing side of Moss Beach, leaving mill-finish or anodized surfaces pitted within a few seasons. We assess whether the frame is cosmetically tired or structurally compromised. If it’s through the metal, we quote a replacement, not a patch.
- Corroded fasteners and flashing at the sill. Galvanized hardware supplied around Mr-Glass door and window openings gives out early in the fog belt. Rust stains bleed down the frame and water opens gaps at the sill. We re-detail these openings in stainless or copper before reinstalling the unit.
- Wind-driven rain behind worn Mr-Glass slider seals. When perimeter seals and weep systems go, Pacific rain pushes past the slider and tracks into the wall cavity. We replace the seals, clear and re-detail the weep system, and check the rough opening for rot before closing anything up.
- Shrinking vinyl frames and gaskets. Constant damp and coastal UV pull vinyl Mr-Glass frames and glazing gaskets at the corners. Fog moisture wicks inside. We replace gaskets and check corner welds, flagging any frame that’s beyond a seal-only repair.
- Storm door hardware failures. Moss Beach’s salt air is rough on hinges, closers, and latch hardware on Mr-Glass storm door lines. We swap in stainless or marine-grade hardware so the door doesn’t sag and bind within a year or two.
Mr-Glass Service in Moss Beach: What Local Conditions Mean for Your Equipment
Moss Beach sits directly on the San Mateo coast fog belt, and on the ocean-facing side of town even newer galvanized fasteners and flashing fail years ahead of inland schedules. That’s not speculation; it’s what we find on nearly every exterior opening we pull. For Mr-Glass owners, it means the glass itself is rarely the failure point. The frame, the fasteners, the flashing, and the wall cavity behind the unit are what go first. Any Mr-Glass in El Granada or Moss Beach opening we touch gets re-detailed in stainless or copper, and we check the back side of every deck ledger before we close the wall. On a mid-century cottage off Cypress Avenue we pulled a fog-fouled Mr-Glass aluminum slider and found the sill flashing and galvanized fasteners had corroded through, with rot running back into the rough opening. We cut out the soft framing, re-flashed the opening in copper, reset the Mr-Glass slider on stainless fasteners, and re-detailed the weep system so the wind-driven rain drains instead of soaking the wall. That’s the difference between a glass company that swaps units and a contractor who knows what this town’s air does to a house.
Mr-Glass Models & Products We Service in Moss Beach
We service the full Mr-Glass range: aluminum sliding patio door systems, vinyl-framed window and slider units, storm door lines, and tempered glass shower and enclosure panels. For parts, we use genuine Mr-Glass replacement glazing, seals, rollers, and hardware where they’re still available. Where the original spec assumed inland conditions, we substitute quality aftermarket stainless or marine-grade fasteners and flashing. On a salt-exposed Mr-Glass unit, we’ll repair seals, rollers, and hardware honestly when the frame and rough opening are sound. Once the aluminum is pitting through or the wall cavity is wet, we tell you the frame is a replace, not a patch. We keep common Mr-Glass rollers, seals, and glazing gaskets on hand or available locally so Moss Beach turnarounds don’t drag.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Moss Beach
What you’ll pay in Moss Beach depends on what’s behind the unit, not just the glass. A simple slider seal and roller replacement is a few hundred dollars. A full window replacement that includes cutting out rot and re-flashing in copper runs higher because the labor is real. Here’s the range on the work we do most:
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Frameless Glass Shower Enclosure (Walk-In Shower Installation) | $4,500 – $12,000 |
A free estimate from us means we open the wall, check the rough opening, and tell you what the opening needs before we quote the unit and the flashing. Call (877) 752-3868 to schedule one.
Serving Moss Beach, CA — Our Local Coverage Area
We’re based in the Moss Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Moss Beach
No. We are an independent construction crew that quotes and installs Mr-Glass products on the merits of the product and the condition of your exterior. We are not the manufacturer, not an authorized agent, and we don’t pretend otherwise.
We keep common Mr-Glass rollers, seals, glazing gaskets, and stainless hardware available for Moss Beach turnarounds. For less common parts, we order directly and schedule the work when everything’s on site. Call (877) 752-3868 and we’ll tell you what’s in stock.
Window and slider replacements in Moss Beach’s coastal zone can trigger permit review, especially when the opening size changes or the job touches structural framing. We pull permits when required and close them out after inspection, so the work is legal and documented. For a full answer specific to your home, call (877) 752-3868.
Seal and roller repairs are typically done in one visit. Full slider or window replacements where we have to cut out rot and re-flash run longer, often two to three days including inspection. Coastal rot doesn’t announce itself until you open the wall, so we build time for that. We’ll give you a schedule before we start.
Window replacement runs $4,500 – $15,000 and impact window installation $8,000 – $25,000, depending on how many openings and how much framing repair the salt air has made necessary. The estimate is free and itemized, so call (877) 752-3868 for exact figures.
Service Areas Near Moss Beach
We serve Moss Beach and the surrounding Peninsula, including Mr-Glass service in Montara, Foster City, Belmont, San Mateo, and San Carlos. We also take on larger coastal and hillside projects farther south, including Mr-Glass service in Los Altos Hills.
Book Your Mr-Glass Service in Moss Beach Today
Call (877) 752-3868 to schedule a free, written estimate for Mr-Glass work in Moss Beach. We’ll check the unit, open the wall if needed, and price the whole job before any work begins.
Written by Glen Mossier, Owner at Ashford Contractors, serving Moss Beach and the San Mateo County coast.