Mr-Glass Construction Service Nationwide

Why Foster City Homeowners Choose Mr-Glass Construction

We provide independent Mr-Glass construction service across Foster City, handling frameless sliding doors, semi-frameless pivot doors, fixed shower screens, and vanity glass as part of full bathroom rebuilds. Unlike a glass-only shop, we treat the enclosure as part of the wall, curb, and waterproofing system behind it. Most Mr-Glass door problems we fix start with the rough opening or the curb pitch, not the glass itself. As an independent Mr-Glass service provider, we owe no sales quota to any manufacturer. Call (877) 752-3868 for a free estimate.

Call (877) 752-3868

Foster City homes are not like the rest of the Peninsula. Built on engineered fill over bay mud, these 1960s through 1980s houses settle, shift, and move in ways that punish any glass panel measured before the framing and tile backer are corrected. A Mr-Glass in Foster City door that binds six months after install did not suddenly bend. The wall behind it moved.

Why Trust Ashford Contractors for Your Mr-Glass Construction?

Glen Mossier, owner of Ashford Contractors, grew up in Foster City’s Marlin Cove neighborhood and spent two decades learning what holds a structure together before ever touching a piece of shower glass. He trained in construction technology at Skyline College in San Bruno, where framing, mechanical systems, and materials science were the core curriculum, before bringing that expertise to Redwood Shores Mr-Glass service. That matters because Mr-Glass enclosures are only as good as the blocking, waterproofing, and curb pitch they anchor into.

Our crew frames, levels, and waterproofs bathrooms before the tile goes up, then installs the Mr-Glass product as the final system in the build. We can tell a door leak that comes from a failed sweep in seconds, and we can also recognize a flat curb, an out-of-square rough opening, or anchors set into unsupported drywall. Those are construction problems wearing a glass problem’s clothes. That is what makes our Mr-Glass work different from a glass shop that shows up to replace what the last guy hung wrong.

Common Mr-Glass Construction Problems We Fix in Foster City

These are the failures we see most often on Mr-Glass enclosures in Foster City bathrooms. Every one of them has a cause we can pinpoint before we touch a hinge or a sweep.

• Frameless sliding doors that bind or jump the track. On Mr-Glass Frameless Sliding Shower Door systems, the glass rides on rollers that need a straight, parallel track. When the rough opening is out of square and the glass was measured before the tile backer was corrected, the door fights the track from day one. In Foster City, where fill-soil settlement keeps moving walls for decades after the original build, an out-of-square opening is normal, not rare.
• Hinge-side and pivot leaks at the curb. This is the most common Mr-Glass issue we see. The door meets a curb that was poured flat and level, with no slope pitched back into the shower. Water pools under the sweep, tracks out onto the bathroom floor, and over time the hinge-side seal degrades. The Mr-Glass hardware is not the problem. The curb geometry is.
• Mineral scale and mold in semi-frameless bottom tracks. Foster City water is hard. On Mr-Glass Semi-Frameless Pivot Shower Doors, the bottom track and sweep catch hard-water scale and hold moisture if there is no squeegee routine. Once scale builds, the sweep no longer seats, water stands in the track, and mold follows. We clean and replace tracks and sweeps, but we also tell homeowners whether their water hardness is making the problem chronic.
• Edge chips and seal failure on tempered glass. A Mr-Glass door mounted against a wall that shifted, or anchored into drywall with no blocking behind it, puts stress on the glass edge. Tempered glass is strong across its face but vulnerable at the edges. A small chip near a hinge is a coming split. The fix is not always a new panel; sometimes it is re-anchoring into blocking and resetting the door geometry.
• Loose pivots and hinge wear from repeated misalignment. When a Mr-Glass pivot door is hung slightly off-plumb, every open and close loads the hinge in a twisting motion it was not designed for. The hinge loosens, the door sags, the sweep drags. We re-plumb, re-hang, and replace worn pivots before the glass edge takes damage.

Mr-Glass Parts & Our Repair-vs-Replace Approach

We maintain a local inventory of Mr-Glass OEM hinges, pivots, sweeps, and seals. OEM parts keep the original door geometry true, which matters more than most people realize. A sweep that is slightly too tall changes the water line. A pivot that is a quarter-degree off changes the closing force. We use quality aftermarket sweeps and magnetic catches when the fit is proven, and we tell you which one you are getting before the job starts.

Our repair-vs-replace rule is simple. We always quote a glass-only repair first when the panel is sound and the opening is square. We recommend full replacement when the tempered glass is chipped at the edge, the frame is bent, or the rough opening itself is out of square and re-framing is the only honest fix. We would rather repair a good enclosure than sell a new one you do not need. Call (877) 752-3868 and we will tell you which one you have.

Our Mr-Glass Service Process – Step by Step

1. 1
   Diagnosis. We check curb slope with a digital level, verify the rough opening with a laser square, and inspect the hinges, sweeps, and seal beads for wear. We look for the construction problem behind the glass problem before anything is removed.
2. 2
   Repair or install. If the enclosure is sound, we replace Mr-Glass OEM parts and re-hang the existing glass. If we are installing new, we set blocking, square the opening, and pitch the curb before the Mr-Glass panel is measured or hung.
3. 3
   Test. We run water across the curb, open and close the door through full travel, and check the sweep seating across the entire bottom edge. If water tracks, we fix it before we call the job done.
4. 4
   Warranty and walkthrough. We walk the finished work with you, explain the squeegee routine that keeps hard-water track scale from coming back, and leave you with a written warranty on our installation labor. Mr-Glass manufacturer coverage stays intact when the glass is hung on a sound opening.

One field example from a recent Foster City hall bath rebuild: the original Mr-Glass semi-frameless door had been mounted to a curb poured dead flat, so every shower left a puddle under the sweep and the bottom track had grown a mold line. We demoed to the studs, re-set a sloped curb with proper waterproofing, squared the opening, and re-hung a Mr-Glass frameless door on new hinges with a clear sweep. No more water on the floor. Build it right the first time, and you won’t be rebuilding it in ten years.

Mr-Glass Products We Service & Install in Foster City

We work on the full Mr-Glass bathroom line: Frameless Sliding Shower Door systems, Semi-Frameless Pivot Shower Doors, Fixed Shower Screens and glass panel enclosures, plus Mr-Glass mirror and vanity glass for full remodels. We keep common Mr-Glass sweeps, pivots, hinges, and seals in the truck and local stock so a repair does not wait on a shipment from the manufacturer.

We also install Mr-Glass enclosures as part of larger bathroom work: walk-in shower builds, tub-to-shower conversions, and complete tile and fixture replacements where the glass goes in last, on a square opening, over a sloped curb.

We Also Service These Brands

Beyond Mr-Glass, Ashford Contractors sources and installs KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler, Grohe, Toto, and Moen fixtures. If your bathroom or kitchen remodel touches multiple systems, we handle the whole scope under one contract and one project manager.

FAQs – Mr-Glass Construction Service in Foster City

Is Ashford Contractors authorized by Mr-Glass? No, we are an independent Mr-Glass service provider, which means we install and repair their products without any sales obligation to the manufacturer. We can tell you when a stock enclosure or a glass-only repair is the better call, because our recommendation is not tied to moving product.

Can you replace just the Mr-Glass door without redoing the whole shower? Yes, when the existing glass panel is unchipped, the frame is straight, and the opening is square, we quote a glass-only repair or a direct door swap using Mr-Glass OEM hinges and sweeps. The full shower only gets redone when the waterproofing behind the tile has failed or the rough opening itself needs re-framing. Call (877) 752-3868 for a free inspection and we will tell you which one applies.

Why does water leak under my Mr-Glass frameless door sweep? Because the curb under the door is flat or sloped the wrong way, so water pools at the sweep instead of draining back into the shower. The fix is not always a new sweep; often the curb needs to be re-pitched with proper waterproofing. We diagnose the curb angle before we quote anything.

Do you install Mr-Glass enclosures in a full bathroom remodel, or only the glass? Both. We handle complete bathroom remodels where the Mr-Glass in San Mateo enclosure is the last piece of a rebuilt shower: demo, framing, waterproofing, tile, fixtures, and finally the glass, hung square on blocking we set ourselves. We also do glass-only repairs and replacements in existing bathrooms.

Will a frameless Mr-Glass door work in an older Foster City home with out-of-square walls? Yes, but only if the rough opening is corrected before the glass is measured and hung. Foster City homes from the 1960s through the 1980s have settled on bay mud, so out-of-square walls are common, a challenge we also address with Mr-Glass in Belmont. A competent install includes squaring the opening, setting blocking, and measuring the glass after the tile backer is dead plumb. If a frameless door goes in without that prep, it will bind or leak, and no adjustment will fix the root cause.

How much does Mr-Glass construction cost in Foster City? It depends on whether the enclosure is part of a full rebuild or a glass-only repair.

Glass-only repairs run lower than a full enclosure replacement; the honest price depends on what the curb and the opening are doing. Call (877) 752-3868 for an exact quote, and we will tell you if a repair gets you another ten years.

Book Your Mr-Glass Service in Foster City, CA

If your Mr-Glass shower is leaking, binding, or just looks tired, call Ashford Contractors at (877) 752-3868 for a free estimate. We serve every neighborhood in Foster City, from the lagoon-side homes to the townhome communities, and we diagnose before we quote. No obligation, just a straight answer.

Written by Glen Mossier, Owner at Ashford Contractors, serving Foster City and San Mateo County.