Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Colma, CA | Ashford Contractors
We provide independent Mr-Glass installation and repair across Colma’s cemetery-district buildings and the El Camino Real commercial strip, plus Pacifica Mr-Glass service, and the one thing that makes our work different here is that we size and shim every unit for fog-belt damp, not for a warm occupied house. Glen Mossier runs our crews, and we’re the team Colma property managers call when a Mr-Glass enclosure has seized rollers or failed seals in an unheated building. If you need Mr-Glass shower enclosures, storefront glazing, or partition glass serviced in Colma, call (877) 752-3868 for a free estimate.
Why Colma Residents Choose Us for Mr-Glass Service
Colma isn’t like Foster City or San Mateo when it comes to glass work, though we do offer Mr-Glass repair in South San Francisco as well. The buildings here sit in persistent coastal fog, and many of them belong to cemetery districts that keep spaces unheated for months at a stretch. That changes how Mr-Glass units fail and how they need to be installed. We’ve walked through enough columbarium facilities and mortuary buildings off El Camino Real to know that a shower enclosure or glass partition that works fine in a lived-in home will develop problems here in half the time if the installer didn’t account for moisture and low sun exposure.
Glen Mossier grew up in Foster City’s Marlin Cove neighborhood, and he spent years learning construction technology at Skyline College in San Bruno before building his reputation across San Mateo County. That background matters when we’re setting Mr-Glass panels in Colma, because the right shim material and sealant choice is the difference between a door that swings clean for a decade and one that drags in three years. We’re an independent service provider, not a Mr-Glass dealer, and we work with OEM Mr-Glass hardware where the profile is proprietary and quality aftermarket stainless parts where the original is generic. Matching the glass thickness and edge profile is what matters.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Colma
- Seized shower-door rollers from fog-belt condensation. Colma’s damp air drives mineral and hard-water buildup into Mr-Glass shower-door tracks and hinge seals. Rollers corrode, doors drag on the sill, and eventually the panel won’t move at all. We pull the panels, replace the rollers with OEM Mr-Glass hardware, and reset the track with a moisture-tolerant seal.
- Failed silicone glazing on El Camino Real storefront glass. The commercial entries along El Camino Real stay chronically wet because of the fog and low sun exposure. Silicone seals and framing gaskets never fully dry out, so caulk adhesion fails and water wicks behind Mr-Glass storefront and partition glass. We re-glaze and re-gasket those units with sealants rated for constant moisture.
- Squeaks, loose pivots, and cloudy tempered edges from slow curing. Colma’s cool, damp air slows the cure of setting blocks and sealants. A Mr-Glass enclosure installed without a moisture-tolerant detail will start squeaking at the pivots and show clouding at the tempered edges within a couple of years. We correct the shim and seal detail, not just the symptom.
- Warped and bowed Mr-Glass closet and partition panels in unheated buildings. Cemetery and mortuary buildings sit unoccupied and unheated for long stretches. Mr-Glass closet and partition glass in those spaces warps, sags, or bows where the hardware was shimmed for a warmer, occupied building. We re-shim and re-hang those panels for the actual conditions.
- Dragging Mr-Glass sliding panels in caretaker quarters. Colma’s few residential-style quarters, like those at cemetery facilities, see intermittent use. That mix of occasional heat and constant damp is hard on sliding hardware. We service those units regularly and keep the replacement parts on hand.
Mr-Glass Service in Colma: What Local Conditions Mean for Your Equipment
Colma is a town legally dedicated to cemeteries, with more than a million buried residents and only a few hundred living ones, and that fact shapes every Mr-Glass job we do here. The cemetery-district properties are largely unoccupied, unheated buildings, so Mr-Glass shower and partition glass fails on seal and hardware degradation, not on the heavy daily use that drives failure in a lived-in house. A shower door in a Foster City home fails because a family of four opens and closes it twenty times a day. A shower door in a Colma caretaker’s quarters fails because it sits in fog for six months with the heat off, and the seals go slack from the damp. That’s the difference. When we’re called to a columbarium off El Camino Real, we check the hardware and seals first, because the glass is almost never the problem. We were called to one such facility where a Mr-Glass framed shower enclosure in the caretaker’s quarters had a seized roller and a door that dragged after years of fog-belt damp. Our tech pulled the sliding panels, replaced the corroded rollers with OEM Mr-Glass hardware, and reset the track with a moisture-tolerant seal before rehanging the doors. We also re-caulked a Mr-Glass glass partition in the adjoining entry where the gasket had gone slack. Both units close and seal cleanly now.
Mr-Glass Models & Products We Service in Colma
We service the full Mr-Glass lineup you’re likely to find in Colma’s commercial and cemetery-district buildings. That includes framed shower and tub enclosure doors, both swing and sliding units; custom frameless shower glass panels with hinges; interior and exterior glass partitions and storefront glazing; and mirrored closet and wardrobe doors. On the parts side, we keep OEM Mr-Glass hardware and gaskets ready where the pivot, roller, or seal profile is proprietary, and we pair those with quality aftermarket stainless hinges and sweep seals where the original is a generic profile. We repair a Mr-Glass enclosure when the glass is sound and only hardware or seals have failed. We recommend replacement when tempering damage, chipped edges, or a bowed panel means the unit won’t seal tight again. For a deeper look at the brand, see our Mr-Glass sales & service page.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Colma
Here’s what Mr-Glass work typically runs in Colma and the surrounding area. These ranges reflect the local market, and your actual quote will depend on glass thickness, enclosure size, and the condition of the existing framing.
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives the cost in Colma specifically is the condition of the existing seal and hardware, whether we’re working in an occupied or unheated building, and the glass thickness required for the opening. Our free estimate includes a written line-item quote, and we don’t change the price once work starts unless the scope changes. Call (877) 752-3868 to schedule yours.
Serving Colma, CA — Our Local Coverage Area
We’re based in the Colma area and know this community well, and we also provide Daly City Mr-Glass service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Colma
No. Ashford Contractors is an independent service provider. We install and service Mr-Glass products across Colma, but we are not Mr-Glass dealers or an authorized Mr-Glass installer. We use OEM Mr-Glass hardware and gaskets where the profile is proprietary, and we match glass thickness and edge specifications to the original.
We use OEM Mr-Glass hardware and gaskets where the pivot, roller, or seal profile is proprietary, and quality aftermarket stainless hinges and sweep seals where the original is a generic profile. Matching the exact glass thickness and edge profile matters more than the badge, and we stock the common Mr-Glass replacement parts locally so Colma service calls don’t wait on shipping.
Yes, we handle tub-to-shower and walk-in conversions for Colma’s cemetery-district and El Camino Real commercial buildings, including caretaker quarters and staff facilities. We size and shim every opening for Colma’s fog-belt damp rather than assuming a warm, occupied home, which is the detail most installers miss. Call (877) 752-3868 and we’ll walk your facility and give you a written quote.
A typical roller replacement and track reset takes us a few hours on site. Re-glazing a storefront or re-caulking a partition can take half a day. Full shower enclosure replacement usually runs a day or two depending on glass fabrication. The sealant cure time in Colma’s fog belt can add a day, and we build that into the schedule rather than rushing it.
Shower work in Colma typically runs $3,000 to $12,000 depending on whether we’re repairing existing glass or installing a new enclosure, and bathroom remodels that include Mr-Glass work run $9,000 to $28,000. For an exact price on your building, call (877) 752-3868. Our estimates are free, and we give you a written line-item quote before any work starts.
Service Areas Near Colma
We work throughout the fog-belt corridor and the broader San Mateo County area. If your building is in Foster City, Redwood Shores, Belmont, San Mateo, San Carlos, or Highlands-Baywood Park, we’re close by. Check our Colma service area page for the full footprint. We also run Mr-Glass crews up the coast, including Mr-Glass service in Moss Beach and Mr-Glass service in Montara.
Book Your Mr-Glass Service in Colma Today
If you have a Mr-Glass enclosure or partition in Colma that’s dragging, leaking, or clouding, call (877) 752-3868—we also handle Mr-Glass repair in Broadmoor. We’ll come out, assess the unit, and give you a written estimate. Our calendar is open for same-week service in the 94015 area.
Written by Glen Mossier, Owner at Ashford Contractors, serving Colma and the greater San Mateo County area. Build it right the first time, and you won’t be rebuilding it in ten years.