Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Palo Alto, CA | Ashford Contractors
We install and repair Mr-Glass shower enclosures, frameless doors, and glass systems across Palo Alto, from the Craftsman-era baths of Professorville to the mid-century ranches of south Palo Alto, and also offer Mr-Glass service in West Menlo Park. Our Mr-Glass work here is shaped by one thing most contractors miss: Palo Alto’s older homes rarely have plumb, square openings anymore, and glass ordered off a rough measurement doesn’t fix that. Call us at (877) 752-3868 if your Mr-Glass door sags, leaks, or binds.
Why Palo Alto Residents Choose Us for Mr-Glass Service
We’ve installed Mr-Glass enclosures in enough Palo Alto bathrooms to know what happens when you skip the on-site template. The glass shows up, the opening is out of square by a quarter inch, and suddenly you’ve got a panel that won’t close or a sweep that channels water onto the subfloor. We template every enclosure in place, after squaring the rough opening, so the glass fits the actual wall, not the wall someone assumed was straight.
Glen Mossier, who leads our team, trained in construction technology at Skyline College and spent early years on structural remodels across San Mateo County. He’s the reason we reframe and square an opening before glass ever gets ordered. As an independent Mr-Glass service provider offering Mr-Glass in Los Altos Hills, we’re not tied to a dealer’s inventory or a manufacturer’s upsell path. We recommend the enclosure that fits your bathroom, your opening, and your budget.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Palo Alto
- Door sag and hinge-point failure on older semi-frameless units. In 1950s and 60s bathrooms across 94306 and Barron Park, original openings were often set with framing that has since shifted. Hinges carry uneven load, the door drops, and the sweep starts dragging or gapping. We pull the panel, re-hinge at the corrected points, and square the opening before resetting.
- Roller and track corrosion on sliding Mr-Glass enclosures. Palo Alto’s hard water accelerates mineral crust on rollers, tracks, and bottom guides. A door that slides fine for five years suddenly takes two hands to move. We replace rollers with compatible hardware and clean or replace corroded tracks rather than selling a full enclosure swap when it isn’t needed.
- Seal and sweep deterioration that lets water reach the curb and subfloor. Professorville bathrooms with original wood subfloors are unforgiving here. One failed sweep directs shower water under the curb and into framing. We replace sweeps and seals, reset curbs that have settled, and check what’s underneath before it becomes a structural problem.
- Out-of-square openings that leave frameless panels binding or leaking. Glass is rigid. If the wall isn’t plumb, the panel won’t seat against the strike jamb and water escapes at the gap. We correct the rough opening first, then template the glass to the corrected dimensions.
- Neo-angle and corner enclosures with binding doors in tight bath footprints. Eichler-style and ranch homes in south Palo Alto often have compact baths where a neo-angle Mr-Glass unit was the only workable layout. When the hinge side settles even slightly, the door binds. We re-level the base, adjust hinge geometry, and re-align the panel.
Mr-Glass Service in Palo Alto: What Local Conditions Mean for Your Equipment
Palo Alto’s tree protection ordinance and dedicated arborist review can stop a project cold. Heritage and protected coast live oaks dictate setback lines and root-zone exclusion fencing during excavation, so a foundation or addition footprint is often designed around the trees before it’s designed around the house. That same lot-by-lot scrutiny carries into interior work, and it’s why we template every Mr-Glass enclosure on site instead of ordering glass off a rough measurement that a remodel may have shifted. In Crescent Park or Old Palo Alto, where remodels routinely touch framing, plumbing, and subfloor, a shower opening measured before demo will almost never match the opening after. We’ve watched too many glass orders become scrap because nobody re-checked the dimensions once the wall was rebuilt.
Mr-Glass Models & Products We Service in Palo Alto
We service Mr-Glass frameless hinged shower doors, including the Genoa and similar 3/8-inch hinged series, Mr-Glass sliding glass tub and shower enclosures in the semi-frameless by-pass configuration, Mr-Glass neo-angle and corner frameless enclosures for tight bath footprints, and Mr-Glass fixed glass panels with return-panel shower walls. Our parts approach is simple: we source genuine Mr-Glass hardware including hinges, rollers, handles, and sweeps where fit and enclosure warranty require it, and we use quality aftermarket seals and sweeps where they perform identically for less. When a Mr-Glass frame is sound, we re-hinge and re-seal. We push replacement only when the glass itself is compromised or the opening has moved beyond correction.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Palo Alto
Palo Alto’s Mr-Glass work follows the same range we quote across the Midpeninsula, including Emerald Lake Hills Mr-Glass service. What moves the number is the condition of the rough opening, the type of glass you’re replacing, and whether any framing or curb work is needed before glass goes in.
| Service | Palo Alto Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Every free estimate includes an on-site measurement, a check of the existing opening for plumb and level, and a written line-item quote. Call (877) 752-3868 to schedule yours.
Serving Palo Alto, CA — Our Local Coverage Area
We’re based in the Palo Alto area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Palo Alto
Usually, yes. We square the rough opening from the framing side where possible, then template the glass to the corrected dimensions. If the tile itself is badly out of plane, we’ll tell you before glass is ordered rather than after. In a 1920s Craftsman in Professorville, we replaced a sagging semi-frameless Mr-Glass tub enclosure with a 3/8-inch frameless hinged unit after finding the original rough opening nearly half an inch out of plumb. We reframed and squared the opening, reset the curb, and templated the glass in place so the panel closed clean against the strike jamb. No leaks at the sweep, and a door that swings true. Call (877) 752-3868 if your opening needs a second look.
Repair is usually the right call. We replace corroded rollers with compatible hardware, clean or swap the track if needed, and the door moves properly again. Replacement only makes sense when the glass is damaged or the frame itself has warped beyond adjustment. We’ll tell you which one applies before we order anything.
Not directly in the bathroom, but it can affect your project timeline and sequencing if the remodel requires any exterior work such as a bump-out, foundation change, or new plumbing trench. Protected coast live oaks on a Palo Alto lot can dictate setback lines and root-zone exclusion zones during excavation. If your Mr-Glass project is part of a larger remodel, we coordinate around those constraints from the start, working with your General Contractor in Palo Alto as needed.
3/8-inch is the minimum we recommend for a frameless hinged or fixed panel in a bath that gets daily use by multiple people. It holds hardware better and resists flex. Thinner 1/4-inch glass can work for fixed panels in low-use guest baths, but any hinged door should be 3/8-inch or thicker. We’ll match the right thickness to the size of the panel and the weight of the hardware it carries. Call (877) 752-3868 for an exact recommendation after we see your opening.
By making sure the curb is level, the sweep seats fully against it, and the panel is set to drain water back to the shower floor. In Professorville-era bathrooms with original wood subfloors, a leaking curb isn’t an inconvenience, it’s a path for rot. We reset or rebuild the curb when it’s settled, replace the sweep, and test the enclosure under running water before we leave. If you’re seeing water outside your shower, call (877) 752-3868, and we’ll find where it’s escaping.
Service Areas Near Palo Alto
Ashford Contractors provides Mr-Glass sales & service across the Midpeninsula. Beyond Palo Alto itself, we regularly work in Foster City, Redwood Shores, Belmont, San Mateo, and San Carlos. If you’re nearby, see our Palo Alto service area page, or review our Mr-Glass service in Half Moon Bay and Mr-Glass service in Stanford pages for location-specific details.
Book Your Mr-Glass Service in Palo Alto Today
We measure, template, and quote on site so the glass fits the opening you actually have. Call (877) 752-3868 to schedule your free Palo Alto estimate. Same-week appointments are available for repair and replacement work. Build it right the first time, and you won’t be rebuilding it in ten years.
Written by Glen Mossier, Owner at Ashford Contractors, serving Palo Alto and the Midpeninsula.