Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Millbrae, CA | Ashford Contractors
We provide independent CGI cabinet and fixture service across Millbrae, from full kitchen remodels to bathroom vanities that fit the city’s tight postwar lots. Millbrae homes are mostly 1940s – 1960s stucco ranches on narrow parcels, and the one thing that makes our CGI work different here is that we plan around setbacks and marine moisture before we ever order a cabinet box. Ashford Contractors is a licensed Millbrae General Contractor, not a CGI authorized dealer, so our recommendations are built around your house, not a manufacturer program. Call (877) 752-3868 for a free estimate.
Why Millbrae Residents Choose Us for CGI Service
Glen Mossier grew up over in Foster City’s Marlin Cove, watching lagoon-side homes get rebuilt after water damage, and he trained in construction technology at Skyline College in San Bruno before spending two decades on structural remodels across San Mateo County. That background matters here because Millbrae’s housing stock demands it: original single-pane windows, out-of-plumb 1950s framing, shallow foundations, and cabinets that were never designed for bay humidity. We went deep on CGI’s Ready-to-Assemble Shaker and Euro-style lines because Millbrae kitchens keep needing them, and we’ve fitted enough of them into warped old ranches to know where the fasteners fail and which wall needs to be sistered before the boxes go in. We also offer CGI in Burlingame for homeowners just across the county line.
Our crews handle the full scope of CGI work across Millbrae, and we operate as an independent contractor. That means we’re not authorized, sponsored, or endorsed by CGI. Our loyalty is to your house and your budget, not to a manufacturer sales target. We spec CGI’s own OEM hinges and drawer slides where they’ll hold, and we step up to aftermarket soft-close hardware when the factory part is the weak point. You’ll find more about our broader CGI sales & service work across the Peninsula on that page.
Styles & brands we work with
Common CGI Construction Problems We Solve in Millbrae
- RTA cabinet boxes pulling apart at the joints. CGI Ready-to-Assemble boxes go together with cam-locks and dowels, and when a Millbrae bath or kitchen wall isn’t square, those joints carry stress they were never meant to take. The humidity swings off the bay work the fasteners loose over a few seasons. We re-square the wall first, then rebuild or replace.
- Particleboard and MDF cores swelling and delaminating. Millbrae’s foggy summers push marine moisture through poorly flashed stucco and old single-pane windows above sinks. We regularly find CGI end panels and door bottoms that have swollen at the base, and once the core has absorbed water, the fix is replacement, not refinishing.
- Hardware sagging on out-of-plumb 1950s framing. Lightweight CGI doors attached to old framing leave reveal lines that open and close with the seasons. We see doors that won’t sit flush by summer and won’t close at all by winter. The fix usually starts with the wall, not the hinge.
- Surface finish failing from kitchen exhaust and fog-season condensation. In Millbrae kitchens without a properly vented range hood, cooking grease and condensation bond into the factory laminate on CGI cabinet fronts. The finish clouds and peels. Better airflow is the first repair, then drawer fronts get refinished or replaced.
- Bath vanities that never fit the wet wall. Millbrae’s ranches often have 30-inch vanity alcoves and drain lines that sit low. A stock CGI vanity fights the plumbing, and the MDF toe-kick sits directly on a floor that sees moisture every winter. We modify the cabinet or reframe the alcove so the vanity can breathe.
CGI Service in Millbrae: What Local Conditions Mean for Your Equipment
On Millbrae’s flatlands, the dominant housing type is the small postwar single-story stucco ranch on a lot that’s narrower than it looks from the street. The big constraint on any construction work in Millbrae isn’t the house itself; it’s the side-yard setback. On many of these lots, the side yard is only a few feet, and Millbrae’s lot-coverage limits and setback rules mean a kitchen bump-out or rear extension that would sail through in a neighboring city dies at the planning counter here. That’s why we so often design CGI cabinet layouts that gain storage by going vertical, running uppers all the way to the ceiling and reworking interior walls, rather than chasing an extra 30 inches the lot won’t allow. It’s also why a cabinet plan that works in a newer, wider-lot city—or even a Hillsborough CGI service—can fail in Millbrae before you’ve spent a dollar. We’ve pulled too many permits in this city to pretend otherwise.
CGI Models & Products We Service in Millbrae
We install, repair, and reface CGI’s Ready-to-Assemble Shaker and Euro-style cabinet lines, the flat-panel and slab-door European collections, and CGI bath vanities with coordinating cabinet storage. We stock OEM CGI hinges, drawer slides, and touch-up finishes locally so Millbrae turnarounds stay quick, and we keep the better aftermarket soft-close hardware on hand for when the factory spec is the part that keeps failing. For Millbrae homes we’re honest that re-facing or re-boxing a sound CGI layout often beats a full replacement, unless the boxes have already taken on bay moisture and swelled, in which case replacing them is the cheaper long game.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Millbrae
What you’ll spend depends more on the condition of the walls behind the cabinets than on the cabinet line itself. Out-of-plumb framing, rot from old window leaks, and undersized plumbing in a Millbrae ranch add labor, and those costs should be on the estimate, not sprung later. Here are the ranges we see across Millbrae projects:
| Service | Typical Millbrae Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Quartz & Granite Countertops | $2,000 – $6,500 |
| Backsplash | $800 – $2,500 |
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Small Bathroom Remodels | $5,000 – $12,000 |
| Vanities | $800 – $3,000 |
Every estimate is written line-item and free. We walk the space, check the framing and moisture, then price the work so there’s no change order the week you thought we were done. Call (877) 752-3868 to schedule yours.
Serving Millbrae, CA — Our Local Coverage Area
We’re based in the Millbrae area and know this community well, and we also provide CGI service in South San Francisco. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Millbrae
Probably not on the flatlands, and that’s due to Millbrae’s few-foot side-yard setbacks more than anything structural in your house. When the setback kills a bump-out, we pivot: run cabinets ceiling-height, rework interior partitions, or use drawer systems that pull more storage from the same footprint. Call (877) 752-3868 and we’ll measure what your lot actually allows.
Water is getting in somewhere, and in Millbrae it’s usually a leaking single-pane window above the sink or stucco that wasn’t flashed correctly during an earlier remodel. Millbrae’s marine fog and wet winters mean that moisture gets driven sideways by wind off the bay, so we always trace the water source before replacing any cabinet, otherwise the new boxes swell too.
Yes when the cabinet boxes are still square and dry; no when the MDF or particleboard cores have already absorbed moisture and started to delaminate. In Millbrae’s older homes, the answer often splits one project in half, some boxes get refaced, some get rebuilt. Call (877) 752-3868 for a box-by-box assessment.
They change everything about the prep work. We flash and seal the stucco opening before a single cabinet box goes in, and we leave a moisture gap at the toe-kick so winter floor moisture doesn’t wick up into the MDF. Millbrae exteriors have to be detailed for wind-driven rain, and cabinet installs are no exception.
Yes, and we recommend it. One permit, one demolition schedule, one dumpster, one project manager. Most Millbrae homeowners are already living through a kitchen remodel, and adding a bath vanity and shower means you’re done with the disruption in one pass instead of two. Pricing for a small bath remodel starts around $5,000; a full bath runs up to $28,000. Call (877) 752-3868 for a combined quote.
Service Areas Near Millbrae
Our CGI service territory covers Millbrae and the surrounding Peninsula communities. We work in Foster City, San Mateo, Belmont, San Carlos, and Redwood Shores, and we carry the same CGI OEM parts and installation standards into every one of those cities. If you’re in Woodside, see our page on CGI service in Woodside; if you’re just north, we cover CGI service in San Bruno too. For a broader view, here’s our Millbrae service area page.
Book Your CGI Service in Millbrae Today
We’re scheduling free estimates across Millbrae right now. Call (877) 752-3868 and we’ll walk your kitchen or bath, check the framing, measure the setbacks, and give you a written line-item quote for your CGI work. Build it right the first time, and you won’t be rebuilding it in ten years.
Written by Glen Mossier, Owner at Ashford Contractors, serving Millbrae and the greater San Mateo County area.