Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Bruno, CA | Ashford Contractors
We provide independent San Bruno General Contractor CGI construction service across San Bruno, handling everything from fogged insulated glass and re-glazed sashes to full window and slider replacements. What makes our CGI work here different is simple: we know the 1950s ranches, the Crestmoor rebuilds, and the fog-belt moisture problems that show up in CGI frames on these hillsides. If you’re seeing haze between panes or a slider that no longer tracks, call (877) 752-3868 for a free estimate.
Why San Bruno Residents Choose Us for CGI Service
Glen Mossier, our owner, trained in construction technology at Skyline College right here in San Bruno, where he learned framing, mechanical systems, and the materials science that actually shows up on a job site. That training shaped how our crews approach CGI windows and doors: we diagnose the real problem before quoting a fix. Most homeowners don’t need a full replacement when a sash re-glaze or glass-only swap restores the view and the seal. We work with factory-spec CGI glass, hardware, and weatherstrip matched to the actual series rather than a one-size vinyl window, and we source high-quality aftermarket parts when a factory part is discontinued. On San Bruno ranch homes, we lean toward glass-only and sash-level repair where the frame and flashing are sound, and we recommend full replacement only when the rough opening or water management has already failed. That judgment saves you money and keeps original openings intact.
Styles & brands we work with
Common CGI Construction Problems We Solve in San Bruno
- Fogged CGI insulating glass units. Seal failure between panes shows up as a silvery haze or condensation you can’t wipe off. San Bruno’s cool, damp fog-belt summers accelerate this, especially on older CGI SentinEL sliders and double-hungs. We replace the glass while keeping the sash and frame in place.
- Leaking slider door tracks. Weepholes that load up with debris stop draining, so water tracks across the track and onto your floor. On San Bruno’s stucco ranches, the real culprit is often a missing head flashing where the CGI frame meets the wall. We rebuild the rough opening with proper flashing rather than just clearing the holes and hoping.
- Distorted vinyl sashes. South- and west-facing CGI SentinEL vinyl units get hammered by afternoon sun between fog banks. The sash racks out of square, locks stop aligning, and rollers bind. We re-square or replace the sash before the frame takes permanent distortion.
- Cracked glazing compound on CGI aluminum single-hungs. These are common in 1940s-1960s San Bruno stock. Corroded fasteners let coastal moisture reach the rough opening and rot the surrounding wood frame. We strip the old compound, replace fasteners, and re-glaze before the rot spreads.
- Hardware and weatherstrip wear on slider doors. Rollers flatten, handles loosen, and weatherstrip compresses flat. It seems minor until a coastal wind pushes damp air through the gaps. We match replacement hardware to the specific CGI series rather than forcing a generic vinyl kit.
CGI Service in San Bruno: What Local Conditions Mean for Your Equipment
In the Crestmoor neighborhood, the 2010 gas pipeline explosion leveled a full block, so window work there runs from untouched 1950s single-pane ranch units on one lot to 2011-and-later builds next door. That means a two-house job on the same street can call for completely different flashing and glass specs. Near the PG&E transmission line corridor, exterior work and any digging or staging that could affect the right-of-way gets extra utility scrutiny before we open a wall. On a Crestmoor hillside street, our crew took a 1950s stucco ranch where the CGI aluminum single-hungs had cracked glazing and corroded fasteners and the south-facing CGI slider glass had gone hazy between the panes — a common issue we also address with our CGI service in Millbrae. We re-glazed the slider and rebuilt the rough opening with new head flashing and sealed fasteners rather than replacing the frames, then replaced the failed aluminum sashes where the wood behind them had softened. The result was a weather-tight set of original openings that still match the house, instead of a mismatched window package on a street where the rebuilt lot next door already has modern units.
CGI Models & Products We Service in San Bruno
Our crews work on the CGI SentinEL series in vinyl double-hung and slider configurations, CGI patio sliding glass doors, and the CGI aluminum single-hung windows common in San Bruno’s mid-century infill. We carry matching glass packs, sash kits, rollers, locks, and weatherstrip for these lines, which keeps turnaround short when you need a fast fix. For discontinued factory parts, we source high-quality aftermarket equivalents that hold up to San Bruno’s fog and coastal air. We’re an independent CGI service provider, not manufacturer-affiliated or authorized, so our recommendation is always based on what serves the opening best, never on moving a full replacement sale. When we do replace, we also handle impact window installation and broader window replacement scopes through our CGI sales & service work.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Bruno
What you’ll pay depends on whether we’re re-glazing a sash, swapping glass, or replacing the full window. Here’s what our San Bruno customers typically see:
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Damp fog means exterior sealing and flashing matter more here than in drier parts of the Bay Area. We factor that into every estimate rather than quoting a bare opening swap. Each free estimate includes a written line-item breakdown of parts, labor, and any flashing or rough-opening work. Call (877) 752-3868 for an exact quote on your CGI windows or sliders.
Serving San Bruno, CA — Our Local Coverage Area
We’re based in the San Bruno area and know this community well, and we also offer CGI repair in Pacifica. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Bruno
My CGI slider door in San Bruno is leaking at the track – can it be fixed or does it need replacing? It can usually be fixed. The leak is most often clogged weepholes or missing head flashing where the CGI frame meets an older stucco wall. We clear the drainage path, rebuild the flashing, and re-set the track rather than replacing the entire door. Call (877) 752-3868 and we’ll tell you exactly what you’re dealing with.
Why did the glass in my CGI windows go cloudy when the frames still look fine? That cloudiness is seal failure inside the insulated glass unit. The seal between panes has broken, moisture has entered, and the glass fogs from the inside. San Bruno’s damp fog-belt climate pushes this along faster than in drier areas. The fix is a glass-only replacement; the sash and frame usually stay in place.
Do my Crestmoor windows need different treatment because of the post-2010 rebuilds nearby? Yes, often. Some Crestmoor lots still have original 1950s single-pane CGI aluminum units while the lot next door is a modern rebuild with different flashing and glass specs. We match the repair to what’s actually on your house, but we also check whether the rough opening has aged differently with the soil movement and rebuild activity this neighborhood has seen, similar to our CGI service in Brisbane.
Can you work near the PG&E transmission line corridor in San Bruno without delaying my project? We can. Trenches, staging, and exterior wall openings near the transmission corridor get extra utility scrutiny, so we build that review time into the schedule up front. That way the project keeps moving while the paperwork clears. Call (877) 752-3868 and we’ll walk you through what applies to your property.
What does CGI window work typically cost in San Bruno? Typical window replacement runs $4,500 to $15,000 depending on size and condition. Impact window installation starts around $8,000 and can reach $25,000. Smaller repairs like glass swaps or re-glazing run well under a full replacement. Call (877) 752-3868 for an exact quote – estimates are free.
Service Areas Near San Bruno
We handle CGI service across San Bruno and the surrounding cities, including Foster City, Redwood Shores, Belmont, San Mateo, and San Carlos. If you’re nearby in CGI service in West Menlo Park, we can help. Or if you’re closer to CGI service in South San Francisco, that’s our territory too. Our San Bruno service area covers the 94066 ZIP code.
Book Your CGI Service in San Bruno Today
If your CGI windows are hazing, your slider is dragging, or you just want an honest look at what’s failing, call (877) 752-3868. We’ll schedule your free estimate and get you a written quote. Build it right the first time, and you won’t be rebuilding it in ten years.
Written by Glen Mossier, Owner at Ashford Contractors, serving San Bruno and the greater San Mateo County area.