Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Construction in Redwood Shores, CA | Ashford Contractors
We’re Ashford Contractors, and we provide independent Master Halco fence installation and repair across Redwood Shores. The thing that sets our Master Halco work apart here? We know what bay mud settlement and salt air do to fencing on engineered fill, because we’ve fixed it on Bridge Parkway, along Marine Parkway, and throughout the 94065 zip code. Master Halco builds a solid fence. Redwood Shores just asks more of it than most places. Call (877) 752-3868 for a free estimate.
Why Redwood Shores Residents Choose Us for Master Halco Service
Glen Mossier grew up in Foster City’s Marlin Cove, so he’s been watching bayfront construction and its failures since he was a kid. That background matters when you’re evaluating a fence in Redwood Shores, where the ground under your feet was engineered, not found. Our crews work with Master Halco sales & service products constantly: rackable aluminum ornamental panels, welded steel systems, chain link components, and the gate hardware that ties it all together. We know which fasteners survive this climate and which ones turn to dust in four seasons. When you call us, you’re not getting a handyman who’s seen one Master Halco panel in a catalog. You’re getting a contractor who’s pulled corroded posts out of bay mud and knows why they failed.
Styles & brands we work with
Common Master Halco Construction Problems We Solve in Redwood Shores
Here’s what we see repeatedly in this city, and why it happens here more than anywhere else on the Peninsula:
- Corrosion at cut edges and fastener points. Redwood Shores sits right against the Bay, and the salt-laden air works into every exposed cut edge and every screw hole. Aluminum panels that look fine from ten feet away are often crumbling at the bottom rail and post caps. We replace with factory-finished edges or seal cuts properly so the panel doesn’t start dissolving the day it’s installed.
- Gate binding and latch failure from settlement. Engineered fill compacts over decades. Fence posts set shallow will sink at different rates, which twists the gate frame until the latch won’t catch. We see this on nearly every original 1980s fence in Redwood Shores. The fix is not a new latch; it’s releveling the posts and often resetting them deeper with concrete collars.
- Rust on welded steel where powder coating is compromised. Steel fence systems take a beating in this marine environment. Once the coating gets scratched, salt moisture drives rust underneath and the panel starts failing from the inside. We strip, treat, and recoat where possible, or swap in new Master Halco sections when the steel is too far gone.
- Galvanic corrosion between dissimilar metals. A steel hinge on an aluminum post, a zinc-plated bracket on a powder-coated gate: in Redwood Shores, that combination becomes a tiny battery every time the fog rolls in. We replace with stainless or isolation-wrapped hardware so the parts stop eating each other.
- Chain link fabric sag and post lean. Chain link components don’t resist ground movement well. In areas near the lagoon edges and bayfront, we see entire runs leaning within a decade. Reset the posts, retension the fabric, and the fence is straight again.
Master Halco Service in Redwood Shores: What Local Conditions Mean for Your Equipment
Here’s the thing people don’t realize until they build here. Redwood Shores was created by filling former salt ponds. Under practically every street is layer upon layer of engineered fill over bay mud, and the water table sits close enough to the surface that your fence posts are effectively standing in a wet sponge. That means a standard 24-inch post depth that works fine in San Mateo or Belmont will not hold here. We set fence posts deeper and pour wider concrete collars so they resist the slow slump that plagues shallower installations. It’s not unusual for us to sink posts 30 to 36 inches and collar them with extra concrete on a Redwood Shores lot. A contractor from another city might not know to do that. We do it automatically. This is the same reason we recommend rackable aluminum panels from Master Halco around Redwood Shores: they give you a little forgiveness on grade changes, which happen as fill settles.
Master Halco Models & Products We Service in Redwood Shores
We install and repair the full Master Halco ornamental lineup: rackable aluminum fence panels in standard and custom heights, welded steel fence systems with matching gates, chain link fence fabric and framework, and the post caps, hinges, latches, and brackets that complete each system. For repairs, we use Master Halco OEM parts whenever they’re available, which keeps your warranty intact and the fit exact. On older or discontinued lines, we source aftermarket components that meet or exceed the original spec. We stock common Master Halco hardware and fasteners locally so a sagging gate or corroded latch in Redwood Shores doesn’t wait two weeks for a bracket that could have been swapped in one afternoon.
See the difference
Before
After
Before
After
Before
AfterMaster Halco Service Pricing in Redwood Shores
Every estimate includes a site inspection, so we’re pricing the actual conditions in your yard, not a guess from a photo. Here’s what you can expect:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Driveway Replacement | $5,000 – $14,000 |
What drives the number: linear footage, gate count, whether old posts can be reused, and how much fill settlement we’re dealing with. A fence on a settled Redwood Shores lot with four gates costs more than a level lot with one. We’ll give you a written line-item quote, and the price won’t shift once we start. Call (877) 752-3868 for an exact number.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well, providing general contractor services throughout Redwood Shores. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Master Halco Construction in Redwood Shores
Salt air accelerates corrosion at cut edges, fastener holes, and wherever two different metals touch. Aluminum itself resists rust, but the fasteners and hinges often do not. We use stainless steel hardware and seal exposed edges to slow the process substantially. Unprotected installations start showing white chalky corrosion within a few seasons here. Call (877) 752-3868 and we’ll tell you honestly whether your fence needs repair or replacement.
Yes, but the installation method matters more than the product. On engineered fill, we set posts deeper and use concrete collars around each post base to resist settlement. That’s standard practice for our Foster City Master Halco service and throughout Redwood Shores, and it’s the difference between a fence that stays plumb for 20 years and one that starts leaning in eight. If a previous fence failed, the fill almost always played a role.
An aluminum fence replacement typically runs $4,000 to $10,000 depending on linear footage and gates. Vinyl runs $3,500 to $9,000. Extra-deep post setting on settled lots adds some labor, but it’s the cheapest part of the job compared to doing the whole fence twice. Estimates are free; call (877) 752-3868 and we’ll walk the property line with you.
Most residential fences under seven feet don’t require a building permit in Redwood Shores, but height limits, view restrictions, and BCDC-influenced rules near the bayfront can change that. Our San Carlos Master Halco service follows the same careful approach. We handle the permit check as part of every estimate, and we’ll tell you if your project triggers anything before we touch a post.
Rinse the fence with fresh water a few times each year to wash off salt residue, especially the bottom rail and post bases. Check gate hinges and latches in fall, before winter rain saturates the ground and accelerates settlement issues. If you catch a corroding bracket early, it’s a $50 fix. If you wait until the gate won’t close, it’s a post reset.
Service Areas Near Redwood Shores
We serve Redwood Shores and the surrounding Peninsula, including Foster City, Belmont, and San Mateo. If you’re nearby, we can look at the same salt air and fill conditions, because the bay doesn’t stop at the city line. See our Redwood Shores service area page or check Master Halco service in Belmont and Master Halco service in San Mateo for coverage details.
Book Your Master Halco Service in Redwood Shores Today
We replaced a corroded aluminum ornamental fence off Bridge Parkway not long ago; salt air had eaten through the bottom rails and the posts had sunk unevenly. New Master Halco rackable panels, stainless fasteners, deeper footings. It’s holding straight. Yours can too. Call (877) 752-3868 to schedule a free estimate, and we’ll figure out exactly what your fence needs.
Written by Glen Mossier, Owner at Ashford Contractors, serving Redwood Shores and the surrounding Peninsula. Build it right the first time, and you won’t be rebuilding it in ten years.