Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Construction in Mountain View, CA | Ashford Contractors
We provide independent Master Halco fence and gate service across Mountain View, from ornamental aluminum off El Camino to vinyl privacy runs in the 94040 and 94041 neighborhoods. The thing that makes our Master Halco work different here is how we handle clay-heavy soil that heaves posts after wet winters and a city review process that treats even modest fence projects like small site developments. Call (877) 752-3868 for a free estimate, and we’ll come out, check your lines, and give you a written quote before you order a single panel.
Why Mountain View Residents Choose Us for Master Halco Service
We’ve been installing and repairing Master Halco repair in Loyola and Mountain View fence systems long enough to know which post depth holds in Mountain View’s soil and which panel spans survive the wind that funnels down the transit corridor. Ashford Contractors is an independent contractor, not a manufacturer-authorized shop. That means we source Master Halco posts, panels, rails, and gate hardware directly, and we stand behind the install with our own workmanship warranty, not a corporate claims line.
Our owner, Glen Mossier, grew up in Foster City’s Marlin Cove and trained in construction technology at Skyline College, where he learned framing and materials science the way it actually shows up on a job site. He’s the one who taught our crews to check plumb on every post before the concrete sets, because a leaning post is never an accident. When Master Halco work goes in, it goes in square, set on proper footings, and documented for Mountain View’s building division. That’s the standard, and we don’t bend it.
Styles & brands we work with
Common Master Halco Construction Problems We Solve in Mountain View
Every city has its own way of testing a fence. In Mountain View, the tests come from clay soil, wet winters, and long rainless summers that bake the coatings. Here’s what we see most often:
- Posts heaving out of plumb after wet winters. Mountain View’s clay-heavy soil swells when it takes on water from atmospheric-river storms, and Master Halco aluminum and steel posts set at standard depth lose their grip. The post tips, the gate frame opens up, and the welds at the rail connections start taking stress they were never designed for.
- Vinyl panels rattling and cracking on windy infill lots. Flat, open lots near the transit corridor get hit with wind load that unbraced Master Halco vinyl spans can’t handle. Panels shake at the top rail, and post inserts crack where the wind stress concentrates. We reinforce the span and reset the posts when the first sign of that rattle shows up.
- Rust bleed at cut ends, post caps, and hinges. Long sun-and-rain cycles in Mountain View break down coatings wherever the original galvanized or powder coat was disturbed during installation. Cut ends go first, then post caps, then gate hinges. It starts small and spreads fast once the coating opens up.
- Gate hardware falling out of alignment on slope-side lots. Eichler and rancher properties on Mountain View’s gently sloping lots settle after the first big rain, and gate hinges and latches follow the lean. Gates drag, or they stop latching entirely. We re-square the frame and replace the worn hardware before the panel takes damage.
- Flat-roof water damage isn’t your fence, but it’s a neighbor problem. Mountain View’s mid-century flat and low-slope roofs pond water at the seams, and that overflow often runs toward the fence line. We’ve seen Master Halco runs sitting in standing water along the property edge because the roof drainage was never corrected. We flag it when we see it, because a fence can’t do its job in standing water.
Master Halco Service in Mountain View: What Local Conditions Mean for Your Equipment
Mountain View’s permitting runs through the city’s planning and building divisions, and that changes how Master Halco repair in Los Altos and Mountain View work gets laid out. Even a modest fence or gate project gets reviewed against property-line and height rules, so our layouts are drawn to the surveyed lot line before we order panels. In the 94040 Eichler stock off El Camino, we replaced a leaning Master Halco ornamental aluminum run where clay soil had heaved the line posts and the gate stopped latching after the first winter storms. We reset the posts on deeper footings with drainage gravel, re-squared the gate frame, and swapped worn hinges and a latch, so the gate swings and closes against the new surveyed property line. That’s a different approval path than neighboring cities with lighter review, and it means we place posts and document spans differently here than we would in Redwood City or Sunnyvale. If your fence is going in on a lot with an old surveyor’s pin, we find it first.
Master Halco Models & Products We Service in Mountain View
We service the full range of Master Halco residential lines. That includes ornamental aluminum fence panels like the Windsor line, vinyl privacy fencing like Sherwood, galvanized chain link with privacy slats, and the gate hardware that holds it all together: hinges, latches, and post caps. When we repair, we use genuine Master Halco posts, panels, and gate hardware so spans, coatings, and tolerances stay matched to what’s already on your property. For fasteners and concrete, we use quality aftermarket materials where they don’t compromise the system. If a panel section or single gate is failing, we repair it. If the whole run has heaving posts or coating failure, we’ll tell you replacement is the honest call and quote both numbers so you can decide.
See the difference
Before
After
Before
After
Before
AfterMaster Halco Service Pricing in Mountain View
What you’ll pay depends on how much of the run needs work, what the soil looks like when we dig, and whether your property requires new footings or just reset posts. Here are the ranges we quote in Mountain View:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Driveway Sealing | $250 – $700 |
Every estimate includes a site visit, a check of the existing lines or stakes, and a written line-item quote. No charge for any of that. Call (877) 752-3868 to schedule yours.
Serving Mountain View, CA — Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Master Halco Construction in Mountain View
It will if the layout is drawn to the surveyed lot line and respects the city’s height and setback rules. We pull the survey, measure the run, and document where every post lands before we order panels, so the submittal is clean the first time. Call (877) 752-3868 and we’ll walk the property line with you.
Clay soil expands when it takes on water from winter storms, and that expansion pushes posts out of plumb if they aren’t set on deep footings with drainage gravel. We reset leaning posts on deeper footings with gravel under the base so water moves away instead of swelling the soil around the post. If your gate is dragging, call (877) 752-3868 before the hinges take permanent damage.
If the coating is broken only at cut ends and the panels are still structurally sound, we clean the bare metal and treat the cut ends before resealing the coating. If the corrosion has spread down the rail or into the post connection, replacement is the better call. We’ll show you both options and quote each one, so you decide with the numbers in front of you.
Yes, we match the existing line and coating as closely as Master Halco’s current production allows. Unless the existing panels are severely faded, we can typically match color and profile so the new section blends. We’ll bring samples to your house before you commit.
We schedule installs for the dry months when we can set posts in dry soil and let concrete cure without rain interference. If a storm is coming, we’ll pull the schedule forward or hold it back rather than risk a bad footing job. Call (877) 752-3868 to see what our calendar looks like.
Service Areas Near Mountain View
We also provide Master Halco service in Noe Valley and Master Halco service in Mission District. Closer to Mountain View, we run crews through Foster City, Redwood Shores, Belmont, San Mateo, San Carlos, and Highlands-Baywood Park. If you’re within range of Caltrain or just off 101, chances are we’ve already done work on your street.
Book Your Master Halco Service in Mountain View Today
We’re ready to come out, look at your fence or gate, and tell you honestly what it needs. Same-day site visits are available for Mountain View properties when the schedule allows. Call (877) 752-3868 and we’ll set a time to walk the line with you.
Written by Glen Mossier, Owner at Ashford Contractors, serving Mountain View and the greater San Mateo County area since he started framing and setting posts by hand. Build it right the first time, and you won’t be rebuilding it in ten years.