Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Construction in Colma, CA | Ashford Contractors
We provide independent Kohler fixture installation and repair across Colma’s cemetery districts, mortuary buildings, and commercial properties along El Camino Real. The work here is different because almost every Kohler fixture we touch sits in an unheated, damp, intermittently used building, and that duty cycle changes how flush valves, wax seals, and faucet finishes fail. Ashford Contractors handles full bathroom remodels, walk-in shower installations, and small bath renovations with genuine Kohler OEM parts. Call (877) 752-3868 for a free estimate.
We’re a full-scope general contractor, which matters in Colma because Kohler work here rarely stops at the fixture. A running toilet in a mortuary restroom is usually sitting on a slab that’s been fighting fog moisture for decades, and the caulk line, the supply stop, and the subfloor all need the same set of eyes. That’s the job we do.
Why Colma Residents Choose Us for Kohler Service
Glen Mossier, our owner, grew up in Foster City’s Marlin Cove and learned early that Bay Area weather doesn’t forgive shortcuts. He trained in construction technology at Skyline College in San Bruno, where framing and mechanical systems were taught as one discipline, not separate trades. That’s the lens we bring to Kohler work in Colma. A Kohler Memoirs toilet with a scaled AquaPiston canister is not just a plumbing problem; it’s a water problem that started in the walls or under the slab.
Our crew has installed and serviced Kohler fixtures across the Peninsula’s damp, fog-belt commercial and institutional buildings for years. We know how cast iron, vitreous china, and brass-bodied lines actually behave in cold, wet conditions. We’re an independent Kohler sales & service provider, not a manufacturer affiliate, which means we make repair-or-replace calls without a quota attached. When a fixture can be saved with an OEM canister and gasket set, we say so. When pitted cast iron or cracked vitreous china means replacement is the only honest answer, we say that too.
Styles & brands we work with
Common Kohler Construction Problems We Solve in Colma
These are the failure patterns we see most in Colma, and each one has a local reason behind it.
- Weak or running flushes on Memoirs and Devonshire toilets. Colma’s hard water, combined with the constant fog moisture, scales up AquaPiston and class-five flush canisters fast. In cemetery-district and mortuary restrooms with intermittent use, the scaling hardens between visits. The result is a toilet that either won’t stop running or won’t clear the bowl.
- Pitting and spotting on Forté and Purist faucet finishes. Vibrant Brushed Nickel and chrome hold up well in most climates, but Colma’s fog carries salt and never lets surfaces dry. Faucets on exterior-adjacent janitorial sinks and restroom fixtures pit within a few years. We clean, re-cartridge, and refinish where possible, and replace trim when the pitting goes too deep.
- Caulk-line and overflow-gasket leaks on Bellwether cast-iron tubs and Kohler lavatories. Buildings that sit unheated and damp between services never let the seal fully cure. The caulk seam opens, the overflow gasket dries and cracks, and water creeps into places it shouldn’t. We strip, reseal, and replace gaskets using OEM parts that match the original spec.
- Dried-out wax rings and supply stops under rarely used fixtures. Cemetery offices and mortuary restrooms can go weeks without a flush. Wax rings dry, shrink, and crack. Supply stops seize. Water then migrates into subfloors and slab edges that already fight constant ground moisture in Colma’s fog belt.
- Shower system failures in commercial restroom builds. Kohler Choreograph wall systems and traditional tile showers in Colma’s service buildings take a beating from mineral buildup and constant humidity. Grout fails, panels separate at the seams, and drain assemblies corrode. We rebuild these properly, with drainage and waterproofing detailed for a building that will never really be dry.
Kohler Service in Colma: What Local Conditions Mean for Your Equipment
Colma is zoned almost entirely for cemeteries, with a few commercial buildings along El Camino Real and almost no residential housing stock. That means Kohler fixtures here usually land in mortuary and columbarium restrooms and cemetery-district service buildings rather than homes. Those buildings sit unheated and unused for stretches, and that’s exactly the duty cycle that kills flush valves and dries out wax seals. A toilet that flushes clean every morning in a family home can fail in three months in a restroom that sees one visitor a week. We don’t just swap the fixture and walk away. We reset the fixture on a fresh wax ring, replace the supply stop if it’s seized, re-caulk the base where fog moisture has opened the seam, and verify the slab edge isn’t wicking water. Colma’s damp ground means the failure usually goes deeper than the visible part, and fixing only the visible part means doing the job twice.
On a columbarium restroom addition off El Camino Real, our tech traced a repeatedly running Kohler Memoirs comfort-height toilet to a scaled AquaPiston canister and a supply stop that had dried out from months of intermittent use between services. We swapped in an OEM canister and gasket set, replaced the stop, and reset the fixture on a fresh wax ring, then re-caulked the Kohler lavatory base where fog-driven moisture had opened the seam. The restroom has flushed clean and dry through every subsequent fog cycle.
Kohler Models & Products We Service in Colma
We work on the Kohler lines that actually show up in Colma’s institutional and commercial buildings. That includes Memoirs and Devonshire comfort-height toilets with class-five and AquaPiston flush systems, Forté and Purist widespread lavatory faucets in Vibrant Brushed Nickel and chrome, Archer and Bellwether cast-iron alcove tubs, and Choreograph and traditional tile shower systems in commercial restroom builds. Our parts approach is simple. We use genuine Kohler OEM canisters, gaskets, cartridges, and trim where the model is still supported. We spec quality aftermarket valves only where OEM is discontinued and the aftermarket part is rated for the same flow. For pitted cast iron or cracked vitreous china, we tell owners honestly when refinishing won’t hold and replacement makes more sense than chasing a leak.
See the difference
Before
After
Before
After
Before
AfterKohler Service Pricing in Colma
What drives the cost in Colma is rarely the Kohler part itself. It’s the condition of the slab, the caulk line, the supply stop, and the subfloor around it. These are the ranges we work from for common Kohler-related projects.
| Service | Price Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
A free estimate from us includes a look at the fixture, the surrounding slab, the supply lines, and the caulk seams. We’re not quoting a toilet. We’re quoting what it takes to make that toilet stop costing you water and subfloor damage. Call (877) 752-3868 to schedule yours.
Serving Colma, CA — Our Local Coverage Area
We’re based in the Colma area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Kohler Construction in Colma
Yes, and that intermittent-use pattern is exactly what we’re set up for. The typical problem is a scaled AquaPiston canister plus a dried-out supply stop and wax ring. We replace the canister and gasket set with OEM parts, reset the fixture, and re-caulk the base so the fog moisture doesn’t reopen the seam. Call (877) 752-3868 for an exact quote, estimates are free.
Yes, and it happens faster here than in drier parts of the Peninsula. Fog-borne salt plus constant moisture never lets the surface dry, so pitting and spotting on Forté and Purist finishes show up within a few years on exterior-adjacent restroom sinks. We re-cartridge and refinish where possible, and replace trim when the corrosion has gone through the finish.
Yes. We detail the waterproofing and drainage for a building that will never fully dry. That means slab-edge sealing before fixtures go in, wax rings rated for ground-moisture conditions, and caulk lines that stay closed through fog cycles. For a new build, we’ll spec the Kohler models that hold up best in unheated, intermittently used spaces.
Yes, where the model is still supported. We use Kohler OEM canisters, gaskets, cartridges, and trim. We only go aftermarket where the original part is discontinued, and even then we match flow and fit ratings rather than grabbing whatever’s cheapest. For a Bellwether cast-iron tub with a leaking overflow gasket, OEM is almost always still available.
No. We are an independent contractor, not authorized, sponsored, or endorsed by Kohler. We buy genuine Kohler parts on the open market and make straight repair-or-replace calls without any manufacturer relationship pulling us one way. That keeps our recommendations honest when a fixture should be replaced instead of repaired.
Service Areas Near Colma
We serve the full Colma service area and nearby communities across the mid-Peninsula. You’ll also find us working in Foster City, Redwood Shores, Belmont, San Mateo, San Carlos, and Highlands-Baywood Park. For Kohler work on the coast, see our pages for Kohler service in Moss Beach and Kohler service in Montara.
Book Your Kohler Service in Colma Today
If you’re dealing with a running Kohler fixture in a mortuary restroom, a failed shower system in a columbarium addition, or planning a new restroom build off El Camino Real, we’ll walk it with you. Call (877) 752-3868 to schedule your free estimate. Build it right the first time, and you won’t be rebuilding it in ten years.
Written by Glen Mossier, Owner at Ashford Contractors, serving Colma and the greater San Mateo County area.