Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Foster City, CA | Ashford Contractors
We provide independent CWS cabinetry and millwork service across Foster City, from full kitchen remodels to door refacing and box repair. The thing that separates our CWS work here from anywhere else on the Peninsula is the ground itself: Foster City sits on engineered fill over bay mud, so cabinets and countertops are only as true as what’s beneath them. If you need CWS cabinets leveled, refaced, or replaced in a Foster City home, call Ashford Contractors at (877) 752-3868 for a free estimate. We know these cabinet lines and we know this city’s substrate better than any outside crew ever could.
Why Foster City Residents Choose Us for CWS Service
We grew up in Foster City. Glen Mossier, our owner, spent his childhood in Marlin Cove and trained in construction technology at Skyline College, so he understood early what bay mud and lagoon humidity do to a house over decades. Our crew has spent years working on CWS cabinetry and millwork lines in the toughest substrate condition on the Peninsula, and that hard-won experience shows in how we approach a job. Before any CWS box goes in, we probe and re-level the floor and isolate the cabinet base from slab moisture, because Foster City settling will telegraph straight into door reveals and countertop seams otherwise.
We source genuine OEM CWS doors, drawer fronts, hinges, and slides when a box is sound and only the face or hardware has failed. When OEM parts are discontinued, we spec quality aftermarket soft-close hardware and marine-grade moisture-resistant panel goods instead. And we’ll tell you honestly when a settling, swollen CWS box is a replace-don’t-repair call rather than selling you a reface that won’t last three years. That’s the kind of straight answer Foster City homeowners expect, and it’s what we’ve built our name on. Learn more about our broader CWS sales & service.
Styles & brands we work with
Common CWS Construction Problems We Solve in Foster City
- Thermofoil and laminate door skins lifting at the edges. Foster City’s fog-driven moisture cycling, especially in lagoon-front condos, wreaks havoc on older CWS thermofoil doors. The edges peel and curl as humidity swells and shrinks the substrate underneath, and once lifting starts it spreads fast. We replace those doors with new CWS fronts or route to a paint-grade shaker door where OEM thermofoil has been discontinued, and we’ll pair them with soft-close hardware that suits the cabinet’s age and use.
- Particleboard and MDF cabinet boxes swelling and softening at the floor line. The original single-pane aluminum windows and aging decks on 1960s-1980s Foster City ranches let moisture in low, right where cabinet boxes sit. We’ve pulled CWS boxes where the bottom panels crumble like wet cardboard, and the fix starts with drying and isolating the slab, not just swapping boxes. On some Eichler-influenced homes the entire base run has to be rebuilt on moisture-resistant panel stock to hold up.
- Cabinets racking and doors binding as engineered fill settles. This is the Foster City signature problem. The city was built on engineered fill over bay mud starting in the 1960s, and different parts of the same slab can settle at different rates over time, especially near lagoon edges. When a CWS run goes out of square, the doors bind at the corners and drawers drag. We re-level the run over the settling fill and shim the base properly, then rehang the doors so they break square again.
- Hinge and drawer-glide fatigue with screw pull-out in aging CWS boxes. The fasteners in older CWS cabinets were never designed for decades of fog-season swelling and drying cycles. Hinges loosen, screws strip, drawer glides wobble and fail. We upgrade to quality aftermarket soft-close hardware and repair the screw seats properly, rather than just driving longer screws and hoping.
- CWS vanity tops and countertop systems failing at the seams. The laminate and solid-surface tops on many lagoon-side Foster City townhome and condo kitchens have delaminated or cracked at seams after decades of moisture and thermal cycling. We remove, prep, and replace those tops with CWS-compatible systems or upgrade to quartz and granite where the homeowner wants a longer-term solution.
CWS Service in Foster City: What Local Conditions Mean for Your Equipment
Foster City is a master-planned lagoon city built almost entirely on engineered fill in the San Francisco Bay marshland starting in the 1960s, so nearly every construction project here deals with bay mud, high groundwater, and artificial waterways. Unlike Redwood City or San Mateo, virtually nothing in Foster City sits on natural bedrock or original shoreline; the whole built environment is a post-war reclamation project. What that means for CWS cabinets specifically: the flat, low-lying reclaimed land and high water table make drainage, waterproofing, and moisture control dominant concerns, and that shows up in cabinet boxes and doors a decade or two down the line. On a lagoon-side Eichler-influenced ranch off Port Royal Avenue, our crew pulled a 1970s CWS kitchen whose thermofoil doors had lifted at the edges and whose boxes had swollen along the floor line where the deck-side glazing leaked. We dried and isolated the slab, re-leveled the run over the settling fill, and installed new moisture-resistant CWS boxes with aftermarket soft-close hardware and a quartz top, so the doors and countertop seams now break square. The homeowner got a kitchen that reads factory-tight even though the ground under it is bay mud. That’s the difference between knowing cabinets and knowing Foster City. Our service area spans the city, which you can see on our Foster City service area page.
CWS Models & Products We Service in Foster City
We work on the full range of CWS cabinetry and millwork lines common in Foster City homes, and we also serve clients seeking San Mateo CWS service. The Brookhaven / Madison-style raised-panel and shaker cabinet lines that went into so many 1970s and 80s Foster City ranches, especially in neighborhoods like Marlin Cove and the lagoon-front streets off Port Royal Avenue. The CWS semi-custom painted and thermofoil door styles used in lagoon-side townhome and condo kitchens, including a lot of the older CWS vanity lines. CWS laminate and solid-surface vanity tops and countertop systems. And the CWS ready-to-assemble and semi-custom cabinet boxes now being specified for ADU and garage-conversion kitchenettes around Foster City. As an independent contractor we service and install CWS products on their merits, not under any manufacturer authorization or warranty endorsement.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Foster City
What a CWS cabinet job costs in Foster City depends on scope, condition of the existing boxes, and whether the substrate needs leveling work. Here are the ranges we quote most often:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
| ADU Construction | $90,000 – $220,000 |
Every quote starts with a free in-home estimate where we inspect the existing CWS boxes, check the floor and slab condition, and map the work in writing. No pricing surprises after we start. Call (877) 752-3868 to schedule your free estimate.
Serving Foster City, CA — Our Local Coverage Area
We’re based in the Foster City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Foster City
If the cabinet boxes themselves are sound and only the thermofoil or laminate door skins have lifted, we can replace just the doors and drawer fronts with new CWS fronts or a quality paint-grade alternative, and that usually solves the problem. If the boxes are swollen or racked out of square from years of Foster City humidity and settling, refacing the doors won’t fix the underlying issue, and we’ll tell you that honestly. Call (877) 752-3868 for a free inspection and a straight answer.
Yes. Foster City’s engineered fill settles unevenly over time, especially near lagoon edges, so cabinet runs can go out of square and doors start binding. We probe and re-level the floor and isolate the cabinet base from slab moisture before any CWS box goes in, because a settling floor will telegraph straight into door reveals and countertop seams. It’s a Foster City-specific step that most outside contractors skip.
We do that regularly. CWS ready-to-assemble and semi-custom cabinet boxes are a practical choice for ADU and garage-conversion kitchenettes in Foster City, and we handle the full build from framing through finish. We’ve done garage conversions across Foster City where the original slab needed leveling before any cabinet work could start, and we can connect you with our General Contractor in Foster City for larger projects.
Foster City’s planned communities have HOAs with architectural review boards that govern remodels. Interior work like cabinets and countertops usually needs less review than exterior changes, but if your CWS project touches windows, doors, or any exterior-visible work, you’ll likely need HOA approval first. We help homeowners prepare the right documentation and coordinate with the HOA so the project doesn’t stall.
Cabinet installation in Foster City typically runs $4,000 to $13,000, and a full kitchen remodel with CWS cabinets and countertops usually lands between $14,000 and $45,000 depending on scope and materials. Countertop installation alone typically runs $2,000 to $6,500. Call (877) 752-3868 for an exact quote on your Foster City home, estimates are free.
Service Areas Near Foster City
Our CWS cabinetry and millwork service extends across the mid-Peninsula. We handle CWS service in Redwood Shores, CWS service in Belmont, plus San Mateo, San Carlos, and Highlands-Baywood Park. If your home sits on engineered fill like Foster City’s, we bring the same leveling and moisture-control discipline to every job.
Book Your CWS Service in Foster City Today
Whether you need a full CWS kitchen rebuild or just a door reface on an older Foster City condo, we’ll inspect your cabinets, check the substrate, and give you a written line-item quote. Call (877) 752-3868 to schedule your free estimate.
Written by Glen Mossier, Owner at Ashford Contractors, serving Foster City, Highlands-Baywood Park CWS service, and the greater San Mateo County area. Build it right the first time, and you won’t be rebuilding it in ten years.