Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Daly City, CA | Ashford Contractors
We install, reface, and repair CWS cabinetry across Daly City, from the fog-heavy west side near the beach to the hillside lots above Westlake. The thing that makes our CWS work different here is simple: we check what’s behind the wall before a single cabinet goes up. Soft framing behind sound-looking stucco is common in Daly City, and no cabinet run holds true on wet lumber. Call (877) 752-3868 for a free estimate.
Why Daly City Residents Choose Us for CWS Service
We’ve spent years working on the postwar stucco-and-wood-frame homes that dominate Daly City’s housing stock. Those 1940s through 1960s tract homes, split-levels, and garage-conversion units have quirks you don’t find in newer construction: out-of-square framing, minimal seismic bracing, and wall cavities that hold damp marine air long after the fog burns off. When we set CWS Concord or Wakefield cabinets, we size them to the room as it actually is, not as the blueprints suggest it should be.
Glen Mossier, our owner, trained in construction technology at Skyline College in San Bruno and has spent two decades on remodels across San Mateo County. He’s the one who taught our crews to check the subfloor and framing square before anything else goes in. That habit matters in Daly City, where a cabinet run installed on soft or out-of-square framing will sag within a season. We source CWS OEM doors, hinges, and drawer boxes when you want an exact match, and we use quality aftermarket glides and soft-close hardware where it’ll hold up better in salt air. Independent means we get to make that call based on what’s right for your home, not what a manufacturer authorizes.
Styles & brands we work with
Common CWS Construction Problems We Solve in Daly City
- Swollen toe kicks and sink bases. The persistent fog and damp marine air on the west side of Daly City keep interiors humid year-round. Particleboard CWS boxes absorb that moisture and swell at the bottom, delaminating at the toe kick and sink base. We remove the damaged boxes, check the subfloor for rot, and rebuild with sealed edges and proper clearance.
- Peeling thermofoil and laminate door faces. Homes near the ocean-facing slopes get salt-laden onshore wind that works its way behind loose caulk and under door edges. CWS thermofoil and painted door faces peel and separate, especially on the beach side of town. We reface with factory-matched CWS doors where the damage is cosmetic, and flag it when moisture has gotten into the box itself.
- Corroded drawer glides and binding hinges. Marine air accelerates corrosion on steel hardware. Glides bind, hinges seize, and doors that were hung true start to sag. We replace with corrosion-resistant aftermarket hardware where the OEM part fails early here, and we re-align doors to the actual opening, not the original spec.
- Wall cabinets losing anchor purchase. On older split-level and hillside homes, soft wall framing hides behind sound-looking stucco. CWS wall cabinets back out of the wall because the screws never bit into solid wood. We open the wall, sister and re-brace the studs, and re-anchor with appropriate fasteners before remounting the boxes.
- Full cabinet runs out of square. Daly City’s postwar framing settles, and garage-conversion kitchens are rarely square. A CWS run installed without checking reveals gaps and doors that won’t close. We shim, plane, and adjust so doors and drawers close clean on the finished install.
CWS Service in Daly City: What Local Conditions Mean for Your Equipment
Here’s the thing about Daly City that most contractors miss: the fog belt keeps the west side of town damp enough that stucco and wood siding rot from the inside out. We routinely find soft framing behind walls that look perfectly sound from the exterior, especially on homes near the beach side along the ocean-facing slopes. Before any CWS cabinet install, we open a section of the wall behind the old boxes. If the studs are soft, they get sistered and re-braced. If the sheathing is compromised, it gets repaired. Then we anchor the new cabinet run to solid lumber. Skip that step and you’ll be re-hanging doors in eighteen months, no matter how good the cabinets are.
On a 1950s stucco split-level in the Westlake area, we pulled a CWS Wakefield cabinet run after the homeowner reported drawers binding and a sagging wall cabinet. The shaker boxes were fine. The framing behind the backsplash wasn’t, soft from years of fog-belt moisture working through the exterior wall. We sistered and re-anchored the studs, added flashing and backer detail at the counter line, then reset the same CWS doors on new boxes with corrosion-resistant glides. The homeowner got a reface-level budget with the wall fixed behind it.
CWS Models & Products We Service in Daly City
We work across the CWS cabinet lines you’ll find in Daly City kitchens: Concord and Wakefield shaker door styles, Bristol and Hanover thermofoil and painted door collections, and the CWS quartz and granite countertop programs paired with their cabinet lines. We also handle CWS ready-to-assemble and semi-custom door-and-drawer box lines for kitchen and bath refacing jobs. Our parts approach is simple: we match CWS OEM doors, hinges, and drawer boxes when you want an exact reface on a discontinued color, and we switch to quality aftermarket glides and soft-close hardware where the OEM part adds corrosion-prone finish with no structural benefit in this salt air. If the boxes are swelling or the framing behind them is soft, we tell you to replace rather than reface because no hardware upgrade saves a water-damaged toe kick.
For broader CWS sales & service questions, we can walk you through what we cover and what’s better handled by a specialist.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Daly City
CWS kitchen work in Daly City doesn’t have a single price. It depends on what’s behind the wall, whether you’re refacing or replacing, and how much framing correction the job needs. Here’s what we see across the city:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
Every free estimate includes a look behind the old cabinets when accessible, because hidden framing damage changes the real cost. Call (877) 752-3868 and we’ll give you a written line-item quote, not a ballpark guess.
Serving Daly City, CA — Our Local Coverage Area
We’re based in the Daly City area and know this community well, and we also provide CWS in Colma. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Daly City
Yes, in most cases. Garage-conversion kitchens in 94014 and 94015 are rarely square, but CWS semi-custom boxes can be shimmed and adjusted to fit the actual opening. We check the framing first. If the walls are sound, a reface or box replacement works without a gut. If we find soft framing or water damage, we handle that repair before the cabinets go in. Call (877) 752-3868 for a free look at your specific layout.
It depends on the boxes. Refacing assumes the cabinet boxes are sound. Near the beach side, the fog and salt wind get behind caulk and into particleboard in ways you won’t see in other Daly City neighborhoods. If the boxes are solid, refacing with new CWS doors and corrosion-resistant glides is a good investment, just as we’d recommend with our CWS service in Visitacion Valley. If the toe kick or sink base is swelling, replace rather than reface. We’ll open a section and show you what’s there before you spend.
Thermofoil and laminate door faces peel at the edges when moisture and salt air get behind them, especially on ocean-facing walls. The west side of Daly City sees this more than anywhere else in the county. Painted doors fare better if the edges are sealed and caulk lines are maintained, but neglected caulk lets the fog do its work. We spec door finishes based on which side of the hill your home sits.
Hillside lots in 94014 and parts of 94016 sit on steep slopes, and Daly City’s hillside rules plus California seismic code both apply—similar to the conditions we address with our Brisbane CWS service. Cabinet boxes and countertop runs need positive anchoring to wall framing, and the framing itself has to be in good condition to hold. On older hillside homes, we often add blocking or sistered studs before anchoring. It’s a code requirement and it keeps your kitchen intact in a quake.
Cabinet installation runs $4,000 to $13,000, countertop installation $2,000 to $6,500, and a full CWS kitchen remodel lands between $14,000 and $45,000 in Daly City depending on scope and hidden framing work. The fog-belt factor means some homes need wall or subfloor repair first, which adds cost. Call (877) 752-3868 for an exact quote; estimates are free.
Service Areas Near Daly City
We cover Daly City and the surrounding Peninsula communities, including Foster City, San Mateo, Belmont, and San Carlos. If you’re nearby, see our Daly City service area page for full coverage details. We also run CWS service in CWS service in Los Altos and CWS service in Mountain View for clients across the mid-Peninsula.
Book Your CWS Service in Daly City Today
Call (877) 752-3868 to schedule your free CWS estimate in Daly City. We’ll check the cabinets, the wall behind them, and the framing, then give you a written quote that’s actually accurate for this city’s conditions.
Written by Glen Mossier, Owner at Ashford Contractors, serving Daly City since our founding.