Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Moss Beach, CA | Ashford Contractors
We provide independent PGT window and door service across Moss Beach, from repairs on corroded WinGuard frames to full impact-rated replacements. What makes our PGT work here different is that we understand the fog belt: salt-laden air, wind-driven rain, and persistent moisture attack these products harder than anywhere else on the Peninsula. If your PGT windows or doors are showing corrosion, leaking, or binding, call (877) 752-3868 for a free estimate. We’re not manufacturer-affiliated. We’re a full-scope general contractor in Moss Beach led by Glen Mossier, and we’ve been working on PGT fenestration systems along the San Mateo coast for years.
Why Moss Beach Residents Choose Us for PGT Service
Most contractors in Moss Beach can hang a window. Few can tell you why a PGT WinGuard aluminum frame is corroding at the sill while the vinyl version two houses down is fine. We can. Glen Mossier trained in construction technology at Skyline College in San Bruno, where he learned the materials science that actually shows up on a job site, and he’s spent decades watching what salt air does to fasteners, flashing, and frame materials. When we work on PGT in Half Moon Bay and Moss Beach, we’re not just swapping glass; we’re evaluating the entire opening: the rough framing, the sill pan, the flashing, the anchorage. That’s the difference between a repair that lasts five years and one that needs redoing in two. We’re one contractor with accountability for the whole assembly, inside and out.
Styles & brands we work with
Common PGT Construction Problems We Solve in Moss Beach
- Salt fog corrosion on PGT aluminum frames. On ocean-facing walls, salt fog eats through factory finishes and corrodes aluminum, especially at sills and hardware contact points. We see this constantly in Moss Beach, where marine air holds moisture against surfaces for days at a time. We repair, refinish, or replace based on what the frame can still do.
- Wind-driven rain infiltrating PGT sliding door tracks. Moss Beach storms push rain sideways. When a PGT sliding door track or sill pan isn’t draining properly, water ends up in the rough opening and rots the subfloor before you ever see it from inside. We check the back side of every deck ledger and door opening we touch.
- Fogged or failed PGT glazing gaskets. UV and salt exposure degrade vinyl seals and rubber gaskets on older PGT windows here faster than inland. Fogging between panes, drafts, and water intrusion all trace back to seal failure. We source OEM PGT gaskets when available, or quality aftermarket seals that hold up to coastal conditions.
- Corroded galvanized fasteners and flashing around PGT openings. Even newer galvanized hardware fails years earlier on Moss Beach’s ocean-facing side. We routinely find rusted anchors and compromised flashing adjacent to PGT windows and doors. Our standard is stainless or copper detailing.
- UV-weakened PGT vinyl window seals on sun-exposed walls. South and west-facing PGT vinyl windows take heavy UV along the coast, which accelerates gasket and seal breakdown. The result is water intrusion at the frame corner and drafts that refuse to seal. We repair or replace the affected components before the rough opening starts to rot.
PGT Service in Moss Beach: What Local Conditions Mean for Your Equipment
On Moss Beach’s ocean-facing side, even newer galvanized fasteners and flashing fail years earlier than inland, so every PGT window or door we touch gets stainless or copper detailing, and we check the back side of every deck ledger for hidden rot. This isn’t a preference; it’s what the fog belt demands. The salt fog off the Pacific shortens the life of standard fasteners so aggressively that we’ve seen corroded anchors on PGT installations less than five years old. In the Cypress Avenue area, where many older coastal cottages sit closer to the water, this effect is even more pronounced. When we open up a wall around a PGT door or window in Moss Beach, we’re not surprised to find rusted flashing, deteriorating sheathing, and fasteners that crumble when we back them out. We address all of it, not just the visible frame. That’s the only way a PGT installation here holds up.
PGT Models & Products We Service in Moss Beach
We work on PGT WinGuard Aluminum series, WinGuard Vinyl series, SolarMax insulating glass packages, and Eze-Breeze vertical sliders. For Moss Beach homeowners, the WinGuard Aluminum line is the one most vulnerable to salt fog corrosion, while the vinyl series tends to fail through UV-degraded seals. We source OEM PGT replacement parts when available for a precise fit, but we’re not locked into OEM: for out-of-production units we use quality aftermarket seals, rollers, and hardware that meet or exceed coastal durability standards. We also assess repair versus replacement honestly. If the frame is sound and corrosion is limited, a targeted repair with stainless components often beats a full replacement, especially on a PGT product that’s still structurally good. For full window and door replacements, we also handle impact window installation and can install PGT products as part of an independent purchase. Our PGT sales & service page covers our complete brand experience across the region.
On a fog-belt cottage off Cypress Avenue, we replaced a set of PGT WinGuard aluminum windows where salt fog had corroded the frames and the galvanized flashing had rusted through, allowing water to rot the wall sheathing. We refastened with stainless steel, installed copper flashing, and sealed the rough openings with a vapor-permeable membrane rated for coastal exposure. The homeowner now has tight, corrosion-resistant openings that should hold up far longer against the marine air. That job is what every PGT installation in Moss Beach should look like.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Moss Beach
What you’ll pay depends on the scope: a targeted seal or hardware repair costs far less than a full impact-rated window replacement. Here are the price ranges we work within for PGT-related work in Moss Beach:
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair (related to window/door water intrusion) | $400 – $1,800 |
What drives cost in Moss Beach specifically is the corrosion factor. If we need to replace flashing, fasteners, or rough framing around a PGT opening, that adds labor and material beyond the window itself. Our free estimates walk through every line item so you know what you’re paying for before we start. Call (877) 752-3868 to schedule yours. We’ll give you a written, line-by-line price, not a vague number.
Serving Moss Beach, CA — Our Local Coverage Area
We’re based in the Moss Beach area and also serve PGT in Pacifica and nearby communities. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Moss Beach
Yes, in most cases. If the frame extrusion is still structurally sound, we can remove surface corrosion, replace compromised hardware and gaskets, and refinish the affected areas. If the frame has corroded through at the sill or corners, replacement is usually the better call. Call (877) 752-3868 for a free assessment and exact quote.
The most common cause in Moss Beach is a failed sill pan or degraded track gasket that lets wind-driven rain into the rough opening. We’ve also found rotted subfloor under doors where water has been entering for years. We inspect the entire opening before recommending a repair. Call (877) 752-3868 to schedule a free estimate.
Yes. We install PGT in El Granada and Moss Beach as part of full window replacement projects. We’re an independent contractor, not a PGT dealer, so you can purchase the windows through your preferred source and we’ll handle the installation and coastal detailing. Impact window installation in Moss Beach typically runs $8,000 – $25,000 depending on the number and size of openings.
Aluminum frames corrode visibly, especially at sills and hardware contact points. Vinyl frames don’t corrode, but their seals and glazing gaskets degrade faster from UV and salt exposure, leading to fogging, drafts, and water intrusion at the corners. Both materials need coastal-specific detailing around the rough opening. For Moss Beach, we recommend stainless or copper fasteners and flashing regardless of frame material.
Yes. We match frame color, grid pattern, glazing package, and operating style so the replacement blends with your existing PGT windows. For discontinued models, we source compatible replacements or fabricate matching trim profiles. Call (877) 752-3868 for a free estimate and we’ll confirm what’s available for your specific PGT model.
Service Areas Near Moss Beach
We serve Moss Beach and the surrounding San Mateo County coast, including Moss Beach service area neighbors: Montara, El Granada, Princeton, Half Moon Bay, and Miramar. For PGT work in the hills to the south, see PGT service in Montara. Inland, we also cover PGT service in Los Altos Hills and the broader Peninsula.
Book Your PGT Service in Moss Beach Today
If your PGT windows or doors are corroding, leaking, or just not sealing like they used to, don’t wait for the rough opening to rot. Call (877) 752-3868 today for a free estimate. We’ll schedule a walk-through, assess every opening, and give you a written quote before any work starts.
Written by Glen Mossier, Owner at Ashford Contractors, serving Moss Beach and the San Mateo coast since 2004.