Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Burlingame, CA | Ashford Contractors
We install, repair, and re-base Unilock paver driveways, patios, and retaining walls across Burlingame. We’re an independent contractor, not a Unilock-authorized dealer, so our work is judged on base prep, drainage, and how the surface holds up through Burlingame’s damp winters rather than a dealer agreement. Call (877) 752-3868 for a free estimate on any Unilock scope, from a new Brussels Block driveway to a sagging Tribeca Cobble patio that needs reconstruction.
Why Burlingame Residents Choose Us for Unilock Service
Glen Mossier grew up a few miles north in Foster City’s Marlin Cove, where he learned early that good construction is what keeps a house standing through decades of Bay Area weather. That lesson carries straight into hardscape: a Unilock paver job fails from the bottom up, not the top down. When our crew works in Burlingame, we’re not just dropping pavers on the ground. We’re thinking through the clay subgrade, the fog-belt moisture, and the drainage pattern of the specific lot.
We work with Unilock sales & service product lines every week. That familiarity means we know which Unilock units hold up on a low-gradient Burlingame lot and which ones need extra base depth before they’ll survive three wet winters. For repairs, we source genuine Unilock pavers and wall units when color and profile have to match the existing run. For the base and jointing, we use quality aftermarket polymeric sand and aggregate where performance outweighs the label.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Burlingame
- Efflorescence blooming on Brussels Block and Beacon Hill pavers. Burlingame’s damp winters and cool summers keep bedding sand saturated for months. When base drainage is marginal, the moisture wicks up through the paver and leaves white mineral deposits on the surface. We fix the drainage first, then clean and re-joint.
- Polymeric sand washout in Tribeca Cobble driveways. Wind-driven winter rain sheets across low-gradient Burlingame lots and strips the joints before the polymer fully cures. We see this most on driveways that pitch toward the street without a proper edge restraint or a drainage swale to slow the sheet flow.
- Settlement and lippage on driveway pavers over clay. Burlingame sits on expansive clay. When a base is compacted over that clay without adequate sub-base depth, the driveway heaves unevenly after the first few wet-dry cycles. Re-laying pavers over the same bad subgrade just buys another failure.
- U-Cara wall block face spalling and joint separation. Retaining walls built without drainage weeping behind the wall or without proper backfill trap water behind the face. In Burlingame’s damp climate, that trapped moisture breaks down the block face and pushes joints apart within a few years.
- Faded or mismatched repair patches. Homeowners or handymen patch a few damaged pavers with whatever unit looks close. Two seasons later the patch is obvious. We source the exact Unilock product line and profile so repairs blend into the original run.
Unilock Service in Burlingame: What Local Conditions Mean for Your Equipment
Burlingame sits directly on the Peninsula between SFO and the bay, and the Burlingame Avenue design-review overlay changes how a Unilock driveway or front patio gets approved before a single base course goes down. Paver color, profile, and layout on visible frontage can be a submittal question: a craftsman in the Burlingame Park or Easton neighborhoods who wants a Brussels Block driveway in a non-standard color may need design-review approval before excavation starts. Contractors working one town south in San Mateo or Millbrae don’t routinely hit that step. Add SFO’s noise-impact zone to the equation and a driveway or patio job in parts of Burlingame can trigger both design approval and insulation-related scope that other towns skip entirely. We handle the submittal paperwork as part of the estimate so a homeowner isn’t surprised by a stop-work order mid-project.
Unilock Models & Products We Service in Burlingame
We service the Unilock product lines most common on Burlingame properties: Brussels Block for driveways and walkways, Beacon Hill for patios and pool decks, Tribeca Cobble for driveways and high-traffic areas, and the U-Cara Wall System for retaining walls and vertical features. For repairs, we source genuine Unilock units when the existing color and profile must match. We stock common jointing sand and base aggregate in our local yard so a Burlingame repair doesn’t wait on a distributor shipment. If a wall or driveway has failed at the base rather than the surface, we say so honestly, and we quote the reconstruction rather than a patch job.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Burlingame
Here’s what Unilock construction work typically costs in Burlingame, based on our recent projects in the area:
| Service | Typical Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives the number is base depth, drainage corrections, and whether Burlingame design-review submittal is needed on the frontage. A free estimate includes an on-site look at the subgrade and the drainage pattern. Call (877) 752-3868 to schedule one.
Serving Burlingame, CA — Our Local Coverage Area
We’re based in the Burlingame area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Burlingame
It depends on the frontage and the scope. Burlingame’s design-review overlay on the Burlingame Avenue corridor and surrounding neighborhoods can require a submittal for paver color, profile, and layout before work starts. We check the property’s status and handle the paperwork as part of the estimate. Call (877) 752-3868 for a free site visit and a straight answer on whether your lot triggers review.
In Burlingame, wind-driven winter rain sheets across low-gradient lots faster than the sand can cure, especially on Tribeca Cobble driveways that pitch toward the street without a drainage swale. The fix is usually edge restraint and drainage correction, not just reapplying sand. Call (877) 752-3868 for an estimate on a drainage-based repair rather than another washout cycle.
Yes. We source genuine Unilock units in the same product line, profile, and color run when the project requires a seamless match. For minor color drift from years of weather, we blend units from the repair area to the original run to minimize the visible seam. Call (877) 752-3868 to schedule a matching assessment.
U-Cara block can work on a Burlingame hillside lot, but only with proper drainage weeping, backfill, and reinforced base. We’ve seen U-Cara walls fail where builders skipped the drainage and trapped water behind the face in our damp climate. The wall system is fine; the installation is where it goes wrong. Call (877) 752-3868 for an honest read on your slope and soil before you commit to a design.
Yes. We navigate both the design-review overlay and the SFO noise-impact zone requirements as part of the project scope. This is one of the things that separates Burlingame work from a job in San Mateo or Highlands-Baywood Park, where these layers don’t apply. Call (877) 752-3868 to get a clear scope on both requirements for your property.
Service Areas Near Burlingame
We serve Burlingame and the surrounding Peninsula communities, including Burlingame service area coverage, Foster City, San Mateo, and the hillside neighborhoods of Unilock service in Hillsborough and Unilock service in Emerald Lake Hills. If your property sits on the border of any of these areas, we can confirm coverage in one call.
Book Your Unilock Service in Burlingame Today
On a Lyon-Hoag-area bungalow off the Burlingame Avenue corridor, our crew pulled up a heaved Brussels Block driveway where the original installer skimped on base depth over clay and the joints had washed out through three wet winters. We excavated to proper sub-base, re-compacted in lifts, re-set the existing pavers to match the Spanish-style frontage through the design-review submittal, and finished with fresh polymeric joints. No lippage after the following rainy season. Build it right the first time, and you won’t be rebuilding it in ten years. Call (877) 752-3868 to schedule your free estimate.
Written by Glen Mossier, Owner at Ashford Contractors, a Burlingame General Contractor serving the greater San Mateo County area.