Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Mountain View, CA | Ashford Contractors
We provide independent Jerith fence, railing, and gate service across Mountain View, from 94040 ranch neighborhoods south of El Camino to the infill lots near downtown and North Bayshore. When Mountain View homeowners call us about Jerith work, the conversation usually starts with a fence line that got drawn into a bigger project: an addition, an ADU, a re-roof, or a driveway rebuild. We handle the Jerith components as part of that full scope, one contract, one project manager. Call (877) 752-3868 for a free estimate on any Jerith fencing or railing work in Mountain View.
Why Mountain View Residents Choose Us for Jerith Service
Jerith aluminum and vinyl fencing shows up all over Mountain View, and it fails in predictable ways here. We know the brand’s actual component system: Regent and Regency ornamental picket panels, Traditional and Regal aluminum rail series, Manchester and Liberty vinyl privacy panels, and Manchester vinyl rail kits. That means we troubleshoot at the part level, not the whole-fence level. A sagging privacy gate is usually a hinge pull-out or a shallow-set post, not a reason to replace two hundred feet of panel.
Glen Mossier, our owner, grew up in Foster City’s Marlin Cove and spent years watching lagoon-side homes get rebuilt after water damage. He learned early that good construction is what keeps a house standing through decades of Bay Area weather, and that applies to fence lines as much as framing. We are not Jerith-authorized, sponsored, or a warranty agent for the brand. We’re a Jerith sales & service contractor who works with the product daily and tells you straight when a run is worth repairing versus replacing.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Mountain View
- Powder-coat loss and galvanic corrosion at post bases. Mountain View’s irrigated planter strips keep soil wet against aluminum footings through the dry season, and dissimilar concrete anchors accelerate the reaction. We see blistering powder coat and white corrosion at the base of street-front posts more often than anywhere else on the panel run. We pull the post, clean or replace the anchor, and re-set with isolation where the site calls for it.
- Post settlement and racking on tree-root-lifted parcels. The 94040 and 94041 neighborhoods have mature street trees and soft, shifting soil. A Jerith aluminum run that was dead level at install can start binding gates and popping panel clips within three or four seasons. This is a footing-depth and root-barrier problem, not a panel defect.
- Vinyl panel sag and hinge pull-out on privacy gates. Jerith vinyl gates take years of hot dry-summer expansion and cold wet-winter contraction. Hinges that were installed into shallow-set gate posts start pulling out under wind load, and the panel sags until the latch no longer lines up. We re-set the gate posts to proper depth and re-hang with through-bolted hardware.
- Aluminum picket-to-rail fastener loosening and rattle. Long street-front runs on El Camino-adjacent lots take sun-side heat expansion every afternoon, then contract through winter nights. Fasteners back out, panels rattle, and occasional delivery-truck damage on tight lots bends pickets. We retighten, replace damaged pickets, and add expansion-aware fastening where needed.
- Fence lines that got located wrong during a remodel. This one is specific to Mountain View. We regularly see Jerith runs that were installed before an addition or ADU got fully permitted, and now the fence line conflicts with the approved setback or grading plan. We re-locate and re-foot the run so the final inspection actually passes.
Jerith Service in Mountain View: What Local Conditions Mean for Your Equipment
Mountain View’s permit desk treats even modest residential additions like small commercial projects. When a homeowner adds a bedroom or builds an ADU in the 94040 flats, the planning and building divisions want a site plan that shows the existing fence line, the proposed fence line, setback dimensions, and grading. A Jerith run is not an afterthought in that plan; it gets located and surveyed before structural work starts, because moving a fence line after framing is permitted means re-drawing, re-submitting, and re-inspecting. We have pulled Jerith posts out of a half-finished addition’s setback zone more than once, and it costs more than doing it in the right order. If your Jerith fence touches a planned addition, ADU, or driveway rebuild in Mountain View, call (877) 752-3868 before the permit goes in, not after.
On a rancher remodel off a 94040 side street near downtown, our crew re-set a leaning Jerith aluminum picket run whose post bases had heaved in tree-root-lifted soil and whose powder coat was blistering at the concrete anchors. We pulled the old footings, re-set the posts to proper depth with new anchors, replaced two racked panels and a sagging gate, and tied the new fence line to the addition’s permitted setback so the final inspection didn’t stall. That is the kind of Mountain View site condition we plan for from day one.
Jerith Models & Products We Service in Mountain View
We install and repair Jerith Aluminum Fence in the Regent and Regency ornamental picket styles, Jerith Aluminum Railing in the Traditional and Regal series for decks and porches, and Jerith Vinyl Fence in the Manchester and Liberty privacy panel profiles. Vinyl railing work runs through the Manchester rail kit line. When a fence system is intact, we use genuine Jerith replacement panels, posts, brackets, and gate hardware. We turn to quality aftermarket pickets and rail caps only when the original profile has been discontinued and a salvage match is not practical. Our Mountain View service area covers 94035, 94039, 94040, and 94041, and we keep common Jerith post caps, hinges, and panel clips on hand for faster turnaround on repairs.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Mountain View
Jerith work in Mountain View is priced by the linear foot, the condition of the existing footings, and whether the work ties into a larger permitted project. Below are the ranges we quote from, and they hold consistent across our Bay Area service area.
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Home Addition | $45,000 – $130,000 |
| Paver Patio Installation | $3,500 – $11,000 |
What drives the cost: linear footage, post depth and existing soil condition, whether the old footings can be reused, and whether the run has to be located to a permitted setback. Every estimate includes a written line-item quote before work starts, and we walk the property with you so you know exactly which panels, posts, and hardware are in the number. Call (877) 752-3868 to schedule a free Jerith service estimate in Mountain View.
Serving Mountain View, CA — Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Mountain View
Yes, in most cases. Mountain View’s planning and building divisions require fence lines that touch a permitted addition, ADU, or grading change to appear on the site plan with setbacks shown. A straight repair of existing panels typically does not need a permit, but moving or re-footing a run during a remodel almost always does. We coordinate that with the rest of your project. Call (877) 752-3868 and we will confirm what applies to your lot.
In Mountain View, the usual cause is post settlement in tree-root-lifted or soft soil in the 94040 and 94041 areas. The gate post drifts slightly out of plumb, the hinge alignment changes, and the gate binds at the latch. We re-set the post to proper depth, often with a deeper footing or root barrier, and re-hang the gate level.
It does more often than people expect. Flat and low-slope roofs on mid-century Mountain View homes pond water and fail at seams during atmospheric-river storms, and the repair work usually means scaffolding, roof tear-off, and material staging right against the fence line. If a Jerith run sits tight to the house, we plan the fence for that access so panels and posts are not damaged mid-project.
Yes, when it is installed with proper post depth and hinge hardware. The vinyl itself holds up well, but gates sag and hinges pull out when posts were set shallow and then flexed through hot-dry and cold-wet cycling for several seasons. We install Manchester and Liberty privacy panels with deeper gate posts and through-bolted hinges so the gate stays plumb through Mountain View’s seasonal swings.
A targeted repair, like re-setting two posts, replacing a racked panel, and re-hanging a gate, usually runs in the low hundreds to the low thousands depending on access and how much of the run is affected. A full replacement of a Jerith aluminum or vinyl run falls into the $3,500 – $10,000 range in Mountain View depending on footage and site conditions. Call (877) 752-3868 for an exact quote, estimates are free.
Service Areas Near Mountain View
Along with our Mountain View service area, we handle Jerith fencing and railing work in Foster City, Redwood Shores, Belmont, San Mateo, San Carlos, and Highlands-Baywood Park. We also run Jerith service in Noe Valley and Jerith service in Mission District for clients with properties across the Peninsula and up into San Francisco. Glen Mossier built his reputation across San Mateo County, and the same crew that re-sets a Jerith gate in Mountain View will do the same job in Foster City with the same standard: build it right the first time, and you won’t be rebuilding it in ten years.
Book Your Jerith Service in Mountain View Today
If your Jerith fence, gate, or railing needs repair, re-footing, or full replacement in Mountain View, call (877) 752-3868 to schedule a free estimate. We walk the property, give you a written line-item quote, and handle the permit coordination when the work ties into a larger project. One contractor, every system, from the roofline to the fence line.
Written by Glen Mossier, Owner at Ashford Contractors, serving Mountain View and the greater San Mateo County area.